CUSTOMER SERVICE +1 (949) 613-5838

Glow in the Dark PLA Filament - 1.75mm

1 Kg of PLA, (aka Polylactic Acid), spooled for 3D Printing use. PLA is a bioplastic which transitions quickly from liquid to solid. This makes it an ideal printing material, one of the most commonly used in consumer 3D printing (along with ABS).

List Price: 49.00 USD
Price: 39.00 USD
Availability: In Stock.
Order Now: Ships calculating... Free U.S. Shipping

1 Kg (2.2 lbs) spool of 1.75mm glow in the dark PLA filament.

PLA, aka Polylactic Acid, is a multipurpose material commonly used in 3D printing. PLA is a bioplastic, which means it is made from renewable natural resources such as corn starch and tapioca products. As a biodegradable material it is much better for the environment, especially compared to petrochemical-based alternatives (such as ABS).

Our PLA is compatible with nearly all 3D printers, including RepRap derivatives and those from MakerBot (such as the Replicator and Replicator 2), Ultimaker, Bits from Bytes, Airwolf3D, Makergear, Printrbot, Bukobot, Type A Machines, and many others. If you have questions about a specific printer not listed, please contact us.

At MatterHackers, we tend to favor PLA as our default printing material due to its high strength and minimal warping.


  • Recommended Extrusion Temperatures: 185C-205C
  • Spool Dimensions (Aprox.): 200mm Total Diameter x 50mm Inner Hole Diameter x 65mm Height
  • Dimensional Accuracy: ±0.07mm
  • Density: 1.25 g/cm³
  • Volume: 0.80 L
  • Length: 332.60 m

All filament comes sealed in a bag with desiccant. We recommend keeping it stored that way until you are ready to use it. Spools not in use should be kept in an airtight container.

Check out our extensive guide to printing in PLA.

Does this stuff require a hardened nozzle?
- asked by Glowy on December 18th, 2016 at 1:33p.m.
I bought a roll of this filament and I've noticed it is rather brittle- is this a common issue, or did I just happen to get a bad batch?
- asked by reederda on August 20th, 2016 at 9:07a.m.
Why is there not a warning on this page that Glow filament is abrasive on regular brass nozzles?
- asked by Shetheory on November 30th, 2015 at 10:51a.m.
how many feet does a spool have
- asked by Edward Bradstreett on September 23rd, 2014 at 12:14p.m.
How long will the luminescence last? How long of an exposure to light does it require to become fully luminescent?
- asked by Guest on April 12th, 2014 at 8:32a.m.
how much cost to print 8×8×8 figure
- asked by yeny on January 2nd, 2014 at 2:21p.m.
Need answers about Glow in the Dark PLA Filament - 1.75mm? Ask a Question