CUSTOMER SERVICE +1 (949) 613-5838

ColorFabb BrassFill Filament - 1.75mm (0.75kg)

Start printing with real brass metal today using ColorFabb BrassFill! BrassFill gives your prints a nice metallic shine, feel, and finish. ColorFabb BrassFill is a fusion of PLA and real brass powder so it can be printed on most desktop 3D printers.

List Price: 85.00 USD
Price: 64.95 USD
Availability: In Stock.
Order Now: Ships calculating... Free U.S. Shipping

ColorFabb BrassFill combines PLA and brass Powder to bring you a premium filament ideal for printing objects that look and feel like real brass. To achieve an authentic brass look and metallic shine, we recommend polishing your BrassFill prints or throwing them in a rock polisher.

Recommended Printing Temperature: 195-220C

Recommended Print Speed: 40 - 100 mm/s

Recommended Heated Bed*: 50-60C

*Heated Bed is recommended, but not completely necessary for successful printing.

Since BrassFill is somewhat softer than BronzeFill and CopperFill, you may need to adjust your retraction settings. 

After printing BrassFill it comes off the print bed with a greenish matte surface, which is similar to that of the BronzeFill. Once polished, it displays an appearance that looks like gold (as seen in the 3D printed “gold bars” you see above).

What percentage of the filament is actual brass?
- asked by Mark l on January 1st, 2017 at 9:31p.m.
Does it work with all 3D printers?
- asked by Zeki Sert on October 5th, 2016 at 7:31p.m.
Can I use a 0.2mm nozzle to print these metal fill filaments?
- asked by Alayax on November 25th, 2015 at 5:26p.m.
Howdy, I am student at Texas State University and a couple others and myself plan on researching whether post curing an FDM part, that's made with a metallic and polymer filament, is viable. We plan on making several small cubes, about 1/2", and possibly chemically stripping some of the polymer away then curing the part in a furnace. We also plan on manufacturing the parts using the bronze filament, so I would need to know some preliminary information like the percentage of bronze in the filament, what unit does the percentage of bronze represent (mass/volume), and what type of polymer is used as a binder (PLA?). Any chance yall know this information, or can get us in contact with someone from ColorFabb who does?
- asked by Richard on November 19th, 2015 at 10:22a.m.
Density? Bed and hot end temperature recommendations? Print speed?
- asked by Dr.Pete on April 19th, 2015 at 3:35p.m.
Is it best to polish this with a tumbling or vibratory polisher?
- asked by garyinco on March 25th, 2015 at 4:31p.m.
Need answers about ColorFabb BrassFill Filament - 1.75mm (0.75kg)? Ask a Question