MatterHackers FREE, FAST Shipping in the U.S. Customer Service +1 (949) 613-5838
Cart ...

Ultimaker 2+ All-Size Nozzle Pack

The Ultimaker 2+ is a high performance, reliable 3D printer and now your creative possibilities are even greater with different nozzle sizes available direct from Ultimaker. These nozzles are directly compatible with the Olsson Block of the Ulitmaker 2+, just make sure to use a wrench and have the block heated when changing nozzles!

Price: 89.00 USD
Availability: In Stock.
Order Now: Ships calculating... Free U.S. Shipping
Qty
Checkout

For the diverse schedule

Can't decide which Ultimaker 2+ nozzle pack is right for you? Neither can we - so here is the variety pack, with two standard 0.4mm nozzles and one each of a 0.25, 0.6, and 0.8 for whatever project comes your way. This pack is ideal for makers who are constantly taking on new and different projects. One day you need the tiny 0.25mm for micro-detail on tiny parts but tomorrow you need large, strong pieces from the 0.6 or 0.8mm. Also a great choice for the new printer owner who wants to experiment with different configurations to find what works best for their needs - these nozzles are directly compatible with the Olsson Block of the Ultimaker 2+ and change out in minutes!

Check out all of the Ultimaker 2+ nozzle packs!

There are five different Ultimaker 2+ Nozzle packs availalbe, take a look at each one right here:

Technical Specifications

  • Filament Diameter: 2.85mm
  • Machine compatibility: Ultimaker 2+ (Olsson Block)
  • Package contents: 5 Nozzles
    • 1x 0.25mm
    • 2x 0.4mm
    • 1x 0.6mm
    • 1x 0.8mm

How to change a 3D printer nozzle

  1. Heat the hotend to the printing temperature of the loaded filement.
  2. Unload the filament from the hotend.
  3. Using a wrench, break the nozzle loose from the hotend.
  4. Carefully unscrew the nozzle from the hotend all the way, it will be hot!
  5. Thread the new nozzle into the hotend, it will heat up quickly so be careful.
  6. Using a wrench, tighten the new nozzle into the hotend. Careful not to over tighten as you run the risk of shearing off the nozzle!
  7. Reload filament and ensure it's flowing freely through your new nozzle.
  8. Print!

Why Buy From MatterHackers

At MatterHackers we pride ourselves on offering friendly service, advice, and support. Our prices are always the lowest in the industry when you factor in our free shipping for every item on the MatterHackers site (including 3D printers). Most of all, our staff is friendly and knowledgeable. They have been 3D printing for several years now and are happy to answer your 3D printing questions. Have a question about the amazing capabilities of your new Ultimaker nozzles? No problem. Feel free to give us a call.

In short, buying a 3D printer from MatterHackers is a holistic experience. We are here to partner with you through every step of your 3D printing journey. Additionally, we have all of the PLAABS, and Specialty Filament that you could ever need to design anything you can imagine.