Ultimaker UltiMaker S5 / S7 Air Manager / 2+ Connect - Replacement Filter Cartridge
Both the UltiMaker S5 S7 Air Manager and the UltiMaker 2+ Connect use an E10 Filter, which has a lifespan of approximately 1500 printing hours. The printer is able to track the usage time of this filter and will prompt users when it is time to be replaced. The filter replacement wizard found in the Maintenance section of the UltiMaker's menus can be used to aid in the replacement of the filter.
- A lifespan of 1500 printing hours
- The S5, S7 and 2+ Connect track usage time and will prompt to be replaced
- The replacement wizard found in the S5 or 2+ Connect's menus makes replacement easy
| List Price: | $58.80 |
|---|---|
| Price: | $56.00 |
| Price: | $... |
TIME TO REPLACE YOUR ULTIMAKER FILTER? NO PROBLEM!
The lifespan of the E10 filter used in both the UltiMaker S5 / S7 Air Manager and the UltiMaker 2+ Connect is approximately 1500 printing hours depending on what materials and settings you are 3D printing with. Luckily, the printers are able to track the usage time of this filter and will prompt users when it is time to be replaced. To replace the filter, use the filter replacement wizard found in the Maintenance section of the UltiMaker's menus. Using the wizard to aid your filter replacement will also allow the filter lifetime counter to be reset to zero.
This table shows the three filter states of the UltiMaker S5 / S7 Air Manager E10 Filter.
