Bondtech QR Universal Extruder - 1.75mm Questions
Is this for a 24vdc system?
asked by Guest David Vidal Rodriguez on January 5th, 2017 at 6:58a.m.

It will work with either 12V or 24V. Stepper motors do not care so much about the voltage supplied to them as the amperage.

- answered by tanderson [MatterHackers] on January 5th, 2017 at 10:38a.m.
Upgrade for a TAZ 6? - Would like to upgrade a TAZ-6 to dual extruder, and to 1.75 filament. Would a pair of these (and I suppose e3D hotends) work?
asked by willray on December 28th, 2016 at 11:55a.m.
- answered by tanderson [MatterHackers] on December 29th, 2016 at 10:28a.m.
Is there the oposite hand available for dual extruders?
asked by Rick on December 19th, 2016 at 8:46a.m.

Sorry, we do not carry the left handed version right now.

- answered by tanderson [MatterHackers] on December 19th, 2016 at 10:27a.m.
Who makes the motor for this unique extruder. I wonder how loud. I have CoolMuscle motors on my Ord Solution 5 extruder model and would this unit fit.
asked by ToolBuilder on November 12th, 2016 at 3:55p.m.

The motor isn't anything special - just a run-of-the-mill NEMA 17. The gearbox is what is special, and I believe Bondtech has that contracted out.

- answered by cope413 on November 14th, 2016 at 10:27a.m.
Can this be fitted to the Makerbot Replicator 2X Machine?
asked by rhluttrell on April 20th, 2016 at 7:09p.m.

Bondtech is now working on Makerbot options that will be released soon.

- answered by Guest on August 13th, 2016 at 6:21a.m.

It would be difficult to modify the Makerbot 2 with that extruder, but it should be doable. You would need to find a mount for it, and you would also need to change the firmware to adjust the steps/mm for the extruder.

- answered by tanderson [MatterHackers] on April 21st, 2016 at 11:33a.m.
Do you have a kit for the Raise3D N2 for dual extruders?
asked by John Welch on June 14th, 2016 at 3:45p.m.

Not yet, but it looks like there are printed parts on the Bondtech.se site

- answered by Taylor on June 14th, 2016 at 5:44p.m.
Is this compatible with the Makergear M2?
asked by Jonathan L. on May 17th, 2016 at 2:09p.m.

You would have to modify your printer to mount this extruder, but it should be doable.

- answered by tanderson [MatterHackers] on May 17th, 2016 at 6:16p.m.
The pictures show a mounting bracket, but none came with the extruder - how am I supposed to mount it???
asked by William on May 14th, 2016 at 1:51p.m.

Sorry for the confusion. We didn't notice that the stock photos had a mount pictured.

All of the mounts can be found here -
http://shop.bondtech.se/ec/mounts/

If you don't have the ability to print one, email us - support@matterhackers.com - with your order number and we can print one and send it out.

- answered by Taylor on May 16th, 2016 at 10:11a.m.
When will the Bowden adapter be available?
asked by William on May 10th, 2016 at 7:31a.m.

The bowden adapter is available as an add-on for $12.

- answered by antonsather [MatterHackers] on May 10th, 2016 at 3:36p.m.
What version are you currently shipping?
asked by samspade4321 on May 10th, 2016 at 1:29p.m.

We carry Bondtech's latest version, the QR.

- answered by antonsather [MatterHackers] on May 10th, 2016 at 3:33p.m.
Will you be carrying the extruder gear kit also or only this full assembly?
asked by Evan on May 7th, 2016 at 9:04a.m.

Hi Evan, currently we only have plans to carry the full assembly unit. Apologies for any inconvenience.

- answered by antonsather [MatterHackers] on May 9th, 2016 at 4:12p.m.
Do you sell the Bowden adapter, also?
asked by Ian Lee on April 13th, 2016 at 11:23p.m.

Hi Ian, we don't have the Bowden adapter for the Bondtech at this time, but plan on carrying it soon.

- answered by antonsather [MatterHackers] on April 15th, 2016 at 10:30a.m.
Will this work in a Makerbot Replicator 2?
asked by Herb Olbrich on April 5th, 2016 at 1:34p.m.

it would be difficult to modify the Makerbot 2 with that extruder, but it should be doable. You would need to find a mount for it, and you would also need to change the firmware to adjust the steps/mm for the extruder.

- answered by cope413 on April 6th, 2016 at 10:03a.m.

Thanks for the info! Will look into it.

- answered by Herb Olbrich on April 7th, 2016 at 9:23a.m.
Would this fit in an XYZ Da Vinci 1.0
asked by ChrisS on April 5th, 2016 at 6:29p.m.

No.

- answered by tanderson [MatterHackers] on April 6th, 2016 at 12:52p.m.
Will it work on s ROBO 3D printer?
asked by James Cullins on April 5th, 2016 at 4:00p.m.

You would need to do some modifications to the printer. This would mainly consist of figuring out or designing a way to mount it.

- answered by tanderson [MatterHackers] on April 5th, 2016 at 6:02p.m.
It looks at though this extruder extends quite a long way out in front of the stepper motor. How much print space are we likely to lose because of that. Follow up - Is this compatible with the Makergear M2 (I imagine yes but would like to be sure)
asked by Guest on April 5th, 2016 at 1:13p.m.

Any change in build area would depend on how the extruder is mounted in your machine. The Bondtech does not come with any mounting hardware. You will need to find or design a way to mount it on your X carriage.

The Bondtech extruder is "compatible" with the M2 in as much as it is compatible with any printer.

- answered by tanderson [MatterHackers] on April 5th, 2016 at 4:00p.m.
Will this work with the Airwolf 3d printers?
asked by Steven on April 5th, 2016 at 11:43a.m.

You could modify an Airwolf to use a Bondtech. The older XL and 5.5 models would be the easiest to modify. The HD and Axiom printers would be more difficult.

- answered by cope413 on April 5th, 2016 at 2:28p.m.
Is this compatible with the MakerBot Replicator 2X stock hot ends?
asked by jgomes on April 5th, 2016 at 12:29p.m.

No, it is not.

- answered by tanderson [MatterHackers] on April 5th, 2016 at 1:01p.m.
will this work with the printbot simple metal with ubis metal hot end?
asked by Tristan on April 5th, 2016 at 9:06a.m.

This is not a direct replacement for the Printrbot extruder. Your machine would require extensive modifications in order to make it work.

- answered by tanderson [MatterHackers] on April 5th, 2016 at 11:08a.m.
When did the highest quality nylon replace metal for the utmost strength and accuracy?
asked by Rick on April 5th, 2016 at 9:44a.m.

It would be significantly more expensive and difficult to machine the parts for this extruder.

Also, there is no need for the strength of aluminum or other metal for the body of the extruder.

- answered by cope413 on April 5th, 2016 at 10:59a.m.
Bondtech QR (bowden) + E3DV6 + Rostock Max V2 = Ninja Flex ??? really?? don't lie!
asked by 6063 T6 on April 1st, 2016 at 2:28p.m.

Absolutely. I have that very setup on my personal machine and it prints ninjaflex with no issues.

- answered by cope413 on April 1st, 2016 at 4:23p.m.
Is this extruder compatible with the E3D hotend?
asked by cquinn on March 31st, 2016 at 9:28a.m.

@cquinn Yes, it is compatible with the E3D v6 HotEnd.

- answered by rhonda [MatterHackers] on March 31st, 2016 at 9:46a.m.
Can this unit switch between 1.75 and 3mm filaments? I have a bunch of 1.75 I want to use up before I switch over to 3mm
asked by partsoven on March 28th, 2016 at 10:48a.m.

They are not switchable. If you need to print 3 mm filament, you will need to get the 3 mm extruder.

- answered by tanderson [MatterHackers] on March 28th, 2016 at 12:47p.m.
Are drive voltages compatible with the Rostock MAX v2 board?
asked by Scott Willis on March 16th, 2016 at 1:43p.m.

Yes

- answered by cope413 on March 16th, 2016 at 2:45p.m.
Need answers? Ask a Question