avoid_crossing_perimeters = 1
bed_shape = rectangular
bed_size = 280,150
bed_temperature = 0
bottom_clip_amount = 0
bottom_solid_layers = 3
bridge_acceleration = 0
bridge_fan_speed = 100
bridge_flow_ratio = 1
bridge_speed = 20
brim_width = 0
build_height = 200
cancel_gcode = G28 X0\n
center_part_on_bed = 1
complete_objects = 0
cool_extruder_lift = 0
cooling = 1
create_raft = 1
raft_extra_distance_around_part = 5
raft_air_gap = .2
default_acceleration = 0
disable_fan_first_layers = 1
end_gcode = (**** End.gcode ****)\nM103 ;Turn extruder off\nM104 S0 ;Zero temperature\nM73 P100 ;End  build progress\nG0 Z155 ;Send Z axis to bottom of machine\nM18 ;Disable stepper\nM104 S0 T0 ;Cool down the Right Extruder\nG162 X Y F2500 ;Home XY endstops\nM18 ;Disable stepper motors\nM70 P5 ( We Be Making Things!)\nM72 P1 ;Play Ta-Da song\n(**** end of End.gcode ****)
external_perimeter_speed = 20
external_perimeters_first = 0
extra_perimeters = 1
extruder_clearance_height = 20
extruder_clearance_radius = 20
extruder_offset = 0x0
extrusion_axis = E
extrusion_multiplier = 1
extrusion_width = 0
fan_always_on = 1
fan_below_layer_time = 999
filament_diameter = 1.75
fill_angle = 45
fill_density = 0.35
fill_pattern = rectilinear
first_layer_acceleration = 0
first_layer_bed_temperature = 0
first_layer_extrusion_width = 100%
first_layer_height = 0.1
first_layer_speed = 50%
first_layer_temperature = 230
g0 = 0
gap_fill_speed = 30
gcode_arcs = 0
gcode_comments = 0
gcode_flavor = makerbot
gcode_output_type = REPRAP
has_fan = 1
has_heated_bed = 0
has_sd_card_reader = 0
infill_acceleration = 0
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0
infill_first = 0
infill_only_where_needed = 0
infill_overlap_perimeter = .06
infill_speed = 40
infill_type = TRIANGLES
layer_gcode = (**** New Layer ****)
layer_height = 0.1
min_extrusion_before_retract = 0
max_fan_speed = 100
min_fan_speed = 50
min_print_speed = 20
min_skirt_length = 0
notes = 
nozzle_diameter = 0.4
only_retract_when_crossing_perimeters = 0
ooze_prevention = 0
output_filename_format = [input_filename_base].gcode
overhangs = 1
pause_gcode = 
perimeter_acceleration = 0
perimeter_extruder = 1
perimeter_extrusion_width = 0
perimeter_speed = 20
perimeters = 2
post_process = 
print_center = 0,0
raft_layers = 0
randomize_start = 1
repair_outlines_extensive_stitching = 0
repair_outlines_keep_open = 0
repair_overlaps_reverse_orientation = 0
repair_overlaps_union_all_together = 0
resolution = 0
resume_gcode = 
retract_before_travel = 1
retract_layer_change = 1
retract_length = 2
retract_length_tool_change = 10
retract_lift = 0
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 30
skirt_distance = 6
skirt_height = 1
skirts = 1
slowdown_below_layer_time = 2
small_perimeter_speed = 30
solid_fill_pattern = rectilinear
solid_infill_below_area = 70
solid_infill_every_layers = 0
solid_infill_extrusion_width = 0
solid_infill_speed = 80
spiral_vase = 0
standby_temperature_delta = -5
start_gcode = (**** Start.gcode for Replicator 2 ****)\nM103 ;disable RPM\nM73 P0 ;enable build progress\nG21 ;set units to mm\nG90 ;set positioning to absolute\n(**** begin homing ****)\nG162 X Y F2500 ;home XY axes maximum\nG161 Z F1100 ;home Z axis minimum\nG92 Z-5 ;set Z to -5\nG1 Z0.0 ;move Z to "0"\nG161 Z F100 ;home Z axis minimum\nM132 X Y Z A B ;Recall stored home offsets for XYZAB axis\n(**** end homing ****)\nG1 X-141 Y-74 Z75 F3300.0 ;move to waiting position\nG130 X20 Y20 Z20 A20 B20 ;Lower stepper Vrefs while heating\nM6 T0 ;wait for toolhead, and HBP to reach temperature\nM70 P5 (We Be Making Things!)\nG130 X127 Y127 Z40 A127 B127 ;Set Stepper motor Vref to defaults\nM108 R3.0 T0\nG0 X-141 Y-74 ;Position Nozzle\nG0 Z1 ;Move above plate\nG1 Z0.3 ;Position Height\nM108 R5.0 ;Set Extruder Speed\nM101 ;Start Extruder\nG4 P3000 ;Create Anchor\nG1 X-137 Y-70 Z0.1 F1000.0 ;Slow wipe\nG0 Z0.3 ;and lift\n(**** end of Start.gcode ****)
start_perimeters_at_concave_points = 0
start_perimeters_at_non_overhang = 0
support_material = 1
support_material_angle = 0
support_material_infill_angle = 45
support_material_create_internal_support = 0
support_material_enforce_layers = 0
support_material_extruder = 1
support_material_extrusion_width = 0
support_material_interface_extruder = 1
support_material_interface_layers = 3
support_material_interface_spacing = 0
support_material_pattern = rectilinear
support_material_spacing = 2.5
support_material_speed = 40
support_material_threshold = 40
support_material_xy_distance = 0.7
support_material_z_distance = 0.15
support_material_z_gap_layers = 1
support_type = GRID
temperature = 240
thin_walls = 1
threads = 2
toolchange_gcode = 
top_infill_extrusion_width = 0
top_solid_infill_speed = 60
top_solid_layers = 3
travel_speed = 40
use_firmware_retraction = 0
use_relative_e_distances = 0
vibration_limit = 0
wipe = 0
wipe_shield_distance = 0
z_can_be_negative = 0
z_offset = 0