Need a gift by Christmas?
We recommend you order by 12/14 at 1:00 pm PST for delivery by Christmas Eve.
Shop All Deals

3DXTech 3DXTech CarbonX PLA+CF Filament - 2.85mm (0.75kg)


3DXTech CarbonX PLA+CF is made using Natureworks PLA and premium high modulus carbon fiber. This material is engineered to offer ease of printing, strength, stiffness, excellent dimensional stability, and an amazing surface finish.

10% off - use code BESTDEALS during checkout - offer ends 12/31/2022
Product No. loading...


CarbonX PLA+CF is an improved CF reinforced 3D printing filament made using high-modulus carbon fiber. This filament is ideal for anyone that desires a structural component with high modulus, excellent surface quality, dimensional stability, light weight, and ease of printing. All 3DXTech materials are made in the USA


PLA is well-known for its incredible ease of printing, stiffness, and extremely high visual print quality. It’s ideal for prototyping, concept models, and end-use printed parts for hobbyists and industry engineers alike!

  • Ideal for printing without a heated bed, no enclosure required
  • Even lower shrinkage and warping, improved by the carbon fiber reinforcement, this PLA prints great on practically any desktop 3D printer
  • Very low odor, perfect for 3D printing in home and office environments
  • Greatly increased stiffness, modulus, and dimensional stability
  • Made from plants, PLA is a renewable biopolymer
  • Gorgeous surface quality to make printed parts look beautiful


  • 1.75mm and 2.85mm +/- 0.05mm in diameter
  • Extruder: 190-220°C
  • Bed Temp: 23-60°C
  • Nozzle: We currently recommend a hardened steel nozzle with a minimum diameter of 0.4mm.
  • Other: Ideal layer height is 60% of nozzle diameter. We do not recommend printing layers smaller than 0.2mm with carbon fiber reinforced filaments.
  • Bed Prep: Magigoo
  • Heated Chamber: Not required
  • Drying Instructions: 65°C for 4 hours.
Back to top