MatterHackers FREE, FAST Shipping in the U.S. Customer Service +1 (949) 613-5838
Cart ...

Sale BCN3D Epsilon W27 Pre-Order Bundle

BCN3D’s powerful Epsilon 3D printer is perfect for printing very large parts using materials that benefit from heated build chambers, such as ABS or Nylon, but not all jobs require the height of the W50. Enter the Epsilon W27. A complete, professional 3D printing solution for designers and manufacturers alike, that's just as wide, deep and capable as its bigger sibling, but not as much of the height you may not use. With a massive build volume of 420mm x 300mm x 220mm, IDEX (independent dual extrusion) with duplication and mirror modes, and a fully-enclosed, passively heated build chamber, the W27 is one BCN3D’s most powerful 3D printer yet.

This bundle includes three free spools of BCN3D ABS and is only available while the Epsilon W27 is in pre-order.

Product No. M531GQDL
Available Add-ons (1)
(Available for preorder) Price: $2,995.00 $2,000.00 View Addon »
Show More Addons
List Price: $6,127.00
Price: $5,995.00
Price: $...
Qty
Checkout

This Special Pre-Order Only Bundle Includes the Following:

  • BCN3D Epsilon W27 3D Printer
  • BCN3D ABS Filament - 2.85mm (0.75kg) x 3 spools

Innovative IDEX Dual Extrusion Design in every Epsilon

The BCN3D Epsilon W27's IDEX technology prints with two heads independently, meaning that during multi-material prints, one toolhead is active while the other stays out of the way.

It's Clean: It's the cleanest solution on the market for dual extrusion 3D printing, because the two extruders work independently when printing water-soluble supports or multi-material parts. While one extruder is printing the second one is parked, preventing the dreaded molten plastic drip onto your part.

Duplication Mode: It allows for Duplication Mode, which means that both toolheads can perform tasks separately and simultaneously, essentially splitting the work and doubling the output. It makes batch printing components faster and easier than ever before.

Mirror Mode: The BCN3D Epsilon W27's IDEX setup gives the machine a unique setting called mirror mode, where the printer can print two opposite parts at the same time. Instead of creating two duplicate parts, you create one model and print them both at the same time, and one is the mirror of the other.

Soluble Supports Mode: By having two separate toolheads, the W27 can print intricate structures without the geometric limitations seen on other 3D printers by printing soluble supports out of one extruder, and the part itself out of the other.

Multi-Material Mode: Each filament material provides different properties, and multiple toolheads allows you to utilize twice as many materials in one print. Combine the strength of ABS with the flexibility of TPU to form vice grips or mechanical spacers. Print with multiple colors for striking PLA pieces. Your imagination is your limit with IDEX 3D printing.

Professionals can iterate quickly and utilize batch manufacturing with BCN3D's Duplication and Mirror Modes. 

ACCURATE, CONTROLLED TEMPERATURES

With the expanding enterprise 3D printing market, ensuring high-quality performance parts has never been more important, and a well-designed enclosure is the key to success. Epsilon’s fully enclosed, passively heated build chamber can reach 60°C by using the heated bed, enabling accurate, industrial-grade 3D printing for large-scale functional parts, right on the manufacturing floor. Confidently print ABS and ASA parts as large or as fine as you want, with no warping, and no delamination.

Built for Power and Ease

With an easy-access, full color, 5" touchscreen, you can control your prints and check the status of prints already in progress. And the entire interface can be switched to other languages, so with the touch of a button, your Sigma is ready to be used by anyone in the world.

Long prints can be an important part of any production line, class room, or makerspace, so BCN3D incorporated a sophisticated Filament Runout Sensor which pauses your prints as soon as you run out of filament. This job-saving sensor allows you to load the next spool and continue exactly where you left off, saving you time, material and headaches.

By incorporating a sturdy aluminum frame, high quality, dual-drive extruders from the experts at Bondtech, and custom e3D hotends, BCN3D has crafted a machine that provides more control, sharper details, and smoother performance for any material with which you need to print.

Tech Specs

  • Technology: Fused Filament Fabrication (FFF)
  • Architecture: Independent Dual Extruder (IDEX)
  • Extruders: 2
  • Printing volume: 420mm x 300mm x 220mm (16.5" x 11.8" x 8.7")
  • Build Chamber: Fully-Enclosed, Passive Heated Chamber
  • Extruder maximum temperature: 300°C
  • Heated bed maximum temperature: 120°C
  • Build chamber maximum temperature: 60°C
  • Nozzle diameter: 0.4mm (installed) / 0.6mm / 0.8mm / 1.0mm
  • Hotend X: 0.6mm
  • Extruder: Bondtech™ high-tech dual drive gears
  • Hotends: Optimized and manufactured by e3D™
  • Layer height: 0.05 – 0.5mm
  • Positioning resolution (X/Y/Z): 1.25µm / 1.25µm / 1µm
  • Filament diameter: 2.85mm
  • Electronics:
    • Single Board Computer: Toradex ARM Compute Module
    • Motion Board: BCN3D Electronics with Independent Stepper Drivers
  • Air filtering category: H13 HEPA filter, Active Carbon filter
  • Heated bed: Silicone thermal pad
  • Printing Modes: Duplication mode, Mirror Mode, Soluble Supports Mode, Multi-material Mode
  • Compatible Materials: PLA, PVA, PET-G, TPU, ABS, PP, PA
    • PP GF30, PAHT, CF15 (with Hotend X)
  • Filament System: Open
  • Operative Systems: Windows, Mac, Linux
  • Firmware: BCN3D Embedded Linux distribution, BCN3D Epsilon - Marlin
  • File preparation software: BCN3D Cura
  • Printer Control Instruction: gcode
  • Supported files: STL, 3MF, OBJ, AMF
  • Connectivity: SD card, Wifi, Ethernet, 5” Full Color Capacitive Touchscreen

  • Overall dimensions: 690mm x 530mm x 750mm (27.2" x 20.9" x 29.5")
  • Weight: 33 kg (72.8 lbs.)
  • Shipping box dimensions: 800mm x 600mm x 1090mm (31.5" x 23.6" x 42.9")
  • Shipping weight: 46 kg (101.4 lbs.)
  • Power Input: AC 84-240V, AC 3.6 - 1.3A, 50-60Hz
  • Maximum Power Consumption: 840W
  • Operating temperature: 15°C – 35°C
  • Operating Sound: 49 dB(A)
  • Certifications: CE / FCC
  • US Warranty: 1 year

Why buy from MatterHackers?

Put simply, MatterHackers is the smart place to shop for all things 3D printing and digital manufacturing. The MatterHackers pros are here to partner with you through every step of your journey turning idea into reality and here are just a few of the perks you’ll receive as a customer:

  • Free, Fast Shipping
    No matter how large or small your order is, U.S. customers will always receive free, fast shipping. Most orders placed before 4pm ET M-F ship same day.
  • Best Price Guarantee
    We work hard to make sure that we offer the lowest prices available - shop confidently knowing you’re getting the best deals on the items you love. Learn more about our Best Price Guarantee here.
  • Rewards Program
    We just want to help you save - MatterHackers' customers can earn a store credit of 3% back on all eligible purchases. Learn more and become a Rewards Program member here.
  • Success Guarantee
    MatterHackers is invested in your success. From our free phone and email support to our easy exchange program, MatterHackers sets you up on the road to success even with just one purchase. Learn more here.

Have a question about this MatterHackers BCN3D Epsilon W27 Pre-Order Bundle? Looking for a recommendation? No problem. Feel free to contact us.