The Slice Engineering High-Temperature Hotend Thermistor eliminates the need for a PT100 or having two separate thermistors to maintain accuracy at both the low and high end of the temperature spectrum. These are simply the highest performing thermistors on the market and are made right here in the USA! The Slice Engineering High-Temperature Hotend Thermistor is a standard sleeved thermistor at 3mm in diameter and features a 15 mm long cable. Each thermistor is attached to 2 meter bare leads making it universally adaptable and easy to install on virtually any printer. Use the Slice Engineering High-Temperature Hotend Thermistor in conjunction with Slice Engineering Boron Nitride Thermal Paste for the highest accuracy results! Compatible with the Mosquito Hotend, Mosquito Magnum Hotend, or any hotend that can fit a standard sleeved thermistor with a 3mm diameter.
*NOTE: Installation of a new thermistor will require selecting the correct sensor in your firmware settings. Some printers may require an update of the RT table in the printer firmware, especially for the 450°C Thermistor. Not all 3D printers allow firmware updates. Please check to ensure your printer will allow firmware updates, otherwise, the thermistor will not work.
The 450°C Thermistor should not be used with printers that use a RAMBo Mini V1.3a or any older version of this board. Common printers with this board include the Prusa MK2.5s, the Prusa MK2.5, the Prusa MK2s, and the Prusa MK2.
Put simply, MatterHackers is the smart place to shop for all things 3D printing and digital manufacturing. The MatterHackers pros are here to partner with you through every step of your journey turning idea into reality and here are just a few of the perks you’ll receive as a customer:
Have a question about this MatterHackers Slice Engineering High Temperature Hotend Thermistor? Looking for a recommendation? No problem. Feel free to contact us.