The core to the Mosquito Hotend is in the separated module design. The frame at the cold end, which feeds the filament down, is separated entirely from the heater block by four metal support rods. This creates a spacious air gap between the two modules, where a minimal, copper heatsink guides the filament down into the heater block, and a small, mounted fan keeps the right amount of air flowing through the whole setup.
By combining each of these design elements, the heat creep effect has been effectively eliminated. The heat will stay contained just where it needs to be for clean, efficient printing-- all in an elegant and compact form.
An additional, exciting benefit of the four-rod design is that the heater block is completely stationary, so inserting and removing your nozzle doesn't move the heater block! With no need to hold the heater block in place, removing and installing your nozzle just became much faster and easier!
The Mosquito Hotend features a small fan that perfectly mounts on the side of the Mosquito Hotend frame, and blows just the right amount of air across the copper heatsink, and away from the print area. This helps ensure the proper temperature required for your 3D printing job is maintained.
All of these incredible design elements of the Mosquito Hotend are achieved in less space than traditional hotends, so by installing a Mosquito Hotend, you actually open up more vertical build volume on your printer! The only downside to this amazing new tool is that you don't have it--yet!
Here are some STL's you can download and print in order to mount your new Mosquito Hotend to your favorite 3D printer:
|Adapter for E3D V6|
|Adapter for Prusa MK2S|
|Adapter for Prusa MK3|
|Groovemount Adapter for Titan Aero|
|Groovemount Adapter for Bondtech QR|
|Railcore II Adapter|
At MatterHackers, we pride ourselves on offering friendly service, advice, and support. Our prices are always the lowest in the industry when you factor in our free shipping for every item on the MatterHackers site (including 3D printers). Most of all, our staff is friendly and knowledgeable. They have been 3D printing for several years now, and are happy to answer your 3D printing questions. Have a question about the amazing capabilities of your new Mosquito Hotend or Bondtech BMG-M Extruder? No problem! Feel free to give us a call.
In short, buying a 3D printer or 3D printer accessories from MatterHackers is a holistic experience. We are here to partner with you through every step of your 3D printing journey. Additionally, we have all of the PLA, ABS, and Specialty Filament that you could ever need to design anything you can imagine.