PolySmooth is the first 3D printer filament specifically designed for post processing and layer line removal. Create parts using PolySmooth filament and use the Polysher to polish and smooth out layer lines on your finished piece. The polishing process is easier than ever as well, just put the part in the Polysher, set the timer you're done! If you need parts with no layer lines the Polymaker Polysher is one of the fastest ways to achieve it!
|Order Now:||Ships calculating... Free U.S. Shipping|
The PolySmooth filament is easy to print with thanks to it's low printing temperature of 220°C and it's low warping factor. After the part is printed just put it inside the PolyMaker Polysher, set the timer and you're done! The machine will polish your part to a smooth, glossy finish. The polishing process usually takes less than a half hour, but obviously large parts will take longer to polish. The Polysher can accommodate parts up to 150mm around and 180mm tall, the circular plate rotates to ensure an even smoothing on every face of your project.
The left part is fresh off the printer, the right is after 25 minutes in the Polysher with 90% Isopropyl Alcohol
Complex models that require support can be a post-processing nightmare. Removing the support material and then having to clean up the joints takes time and effort to get just right. PolySmooth filament is designed for easy support removal with minimal scarring on the part. Combined with the Polysher smoothing, even the most complex and support heavy 3D printed parts can be polished smooth in no time at all.
At MatterHackers we pride ourselves on offering friendly service, advice, and support. Our prices are always the lowest in the industry when you factor in our free shipping for every item on the MatterHackers site (including 3D printers). Most of all, our staff is friendly and knowledgeable. They have been 3D printing for several years now and are happy to answer your 3D printing questions. Have a question about the amazing capabilities of your new PolySmooth? No problem. Feel free to give us a call.
In short, buying a 3D printer from MatterHackers is a holistic experience. We are here to partner with you through every step of your 3D printing journey. Additionally, we have all of the PLA, ABS, and Specialty Filament that you could ever need to design anything you can imagine.