Please email email@example.com or call if you have questions regarding this machine.
We are excited to be one of the few authorized US resellers of Ultimaker. Ultimaker has developed a global reputation and following for having printers that work very well and require very little tinkering. The well designed print head on this printer will quietly and accurately build your creation with an accuracy of 20 microns. This leads to a printed part with a very smooth finish without highly visible print lines. The heated bed allows you to print with a variety of materials and rarely needs to be re-calibrated. Start printing large parts today with a build volume of 9 x 9 x 8 inches.
Once you pull your Ultimaker 2 + out of the box, you're ready to start printing. We recommend using the intuitive MatterControl or MatterControl Touch 3D printing software with your new Ultimaker which will make your printing even more effortless. The Ultimaker 2 + comes with a radial scroll wheel which allows you to make temperature and print speed adjustments during your print. You'll never have to worry about long print jobs - this machine was designed and tested to finish the job without failed prints.
The original Ultimaker 2 was the winner of the 2014 "Best in Shootout" category from Make Magazine for “Undisputed best scores in print-quality tests”. This machine is also the Editors Choice for PC Magazine, the "Most Wanted 3D Printer" for 3D Hubs, and was rated "Best Consumer Product" by 3D Printshow.
Printing Technology - Fused Filament Fabrication
Printing Material - 2.88mm PLA, 2.88mm ABS, Specialty Materials
Nozzle Speed - 30 - 300 mm/s
Build Volume - 9" x 9" x 8"
Layer Resolution - 0.25 mm nozzle: 150 to 60 micron
0.40 mm nozzle: 200 to 20 micron
0.60 mm nozzle: 400 to 20 micron
0.80 mm nozzle: 600 to 20 micron
Printer Dimensions - 19.37"x 13.46"x 21.97"
Printer Weight - 23.8 lbs
Connectivity - USB, stand alone with SD-card
Printer Software - MatterControl
Input Voltage / Power - 100-240 Volts, at 50/60 Hz 24 v DC @ 9.2 amps
Ultimaker's PTFE tubing has issues fitting some 3mm filament, depending on their true diameter and/or a wide dimensional accuracy. For PLA and ABS, we highly recommend our PRO Series, which has a true diameter of 2.88mm and an accuracy within 0.05mm.
Put simply, MatterHackers is the smart place to shop for all things 3D printing and digital manufacturing. The MatterHackers pros are here to partner with you through every step of your journey turning idea into reality and here are just a few of the perks you’ll receive as a customer:
Have a question about this MatterHackers Refurbished Ultimaker 2+ 3D Printer Fully Assembled *A Stock*? Looking for a recommendation? No problem. Feel free to contact us.