Kimya Black ABS Kevlar 3D Printing Filament - 1.75mm (500g)

Kimya Brand 3D printing filament from Armor Group was developed with end-use performance in mind so that you can spend more time innovating, and less time post-processing your functional parts. Kimya brand filaments have a beautiful surface finish and allow you to take your finished 3D printed parts right off of the print bed, and utilize them straight away in your end-use application. Armor Group’s Kimya ABS Kevlar 3D printing filament is no exception. It provides incredible dimensional stability, low warping, a beautiful finish, and lightweight parts.

Tagged: and ,
Product No. loading...


This Kimya ABS 3D printing filament by Armor Group is reinforced with Kevlar aramid fibers to give finished 3D printed parts greater strength and dimensional stability; meaning no shrinkage, high impact resistance, and extremely low warping compared to other filaments. You will also find that the added Kevlar fibers produce a beautifully smooth surface finish, so you can take 3D printed parts right off of the print bed, and use them immediately in your end-use application. Because Kevlar is a very lightweight material, models and parts 3D printed using Kimya ABS Kevlar filament will be lighter in weight than the same model printed in regular ABS.

A jig/fixturing part 3D printed with Kimya ABS Kevlar by Armor Group. Note the beautiful surface finish obtained with Kimya brand 3D printing filaments.


  • This material is very abrasive, so be sure to use at least a hardened steel nozzle!
  • Recommended nozzle temperature: 250°C-270°C
  • Recommended bed temperature: 90°C-110°C
  • Printing speed: 50mm/s
  • Download the Technical Data Sheet here!
Back to top