Liqcreate Liqcreate Resin for LCD & DLP 3D Printers - ESD - 250g
Liqcreate ESD is an opaque black photopolymer resin and can be processed on most resin based3D-printers. 3D-printed parts from this material exhibit electrostatic discharge properties needed for electronic manufacturing and parts for ESD-safe workplaces (EPA). Liqcreate ESD can be used on open DLP, LCD and SLA 3D printers in the range of 385 – 420nm.
Due to the isotropic electrostatic dissipative properties, it is suitable for electronic devices and components that require ESD. Reduce risk and increase manufacturing capabilities by printing custom jigs, fixtures and tools to protect critical electronic components from static discharge.
To learn about available discounts, training, and maintenance options, please use the form below and a MatterHackers Expert will contact you within one business day. Alternatively, you can always feel free to give us a call at +1 (800) 613-4290 or email email@example.com.
To get an instant quote, add everything you need to your cart, and click "Download as quote".
Liqcreate ESD-Safe Resin
A ESD-Safe resin for DLP, LCD, and laser-based 3D printers
Liqcreate ESD was engineered to improve your electronics manufacturing workflows and for the production of ESD-Safe parts. 3D printed parts from this material exhibit electrostatic discharge properties needed for electronic manufacturing and parts for ESD-Safe workplaces. Liqcreate ESD can be used on any open CLP, LCD, or SLA 3D printers in the range of 385-420mn. Due to the isotropic electrostatic dissipative properties, it is suitable for electronic devices and components that require ESD. Reduce risk and increase manufacturing capabilities by printing custom jigs, fixtures, and tools to protect critical electronics components from static discharge.
- Isotropic ESD properties
- Well balanced rigidity and impact
- Antistatic properties
- Easy to print
- Custom jigs and fixtures
- Tools to protect critical electronic components from static discharge
- Industrial applications
HOW TO USE:
- Shake the bottle for at least 60 seconds before use.
- Allow the resin to rest for 10 minutes after shaking to let air bubbles escape before pouring into resin vat.
Note: This resin can be poured back into the bottle after use, however, it is important to check for residual pieces of polymer before doing so. Always take protective measures when handling Liqcreate resins. For more details on safety please check the attached Technical Data Sheet.
- Container: Bottle
- Net weight: 1kg or 250gr
- Appearance: Black opaque liquid
- Wavelength: 385- 420nm
- Viscosity: 1150 mPa⋅s at 25°C
- Density: 1.18g/cm
- Asiga UV series
- Elegoo & Anycubic series
- Phrozen series
- Open 385 - 420nm DLP, LCD and SLA 3D-printers