When upgrading your Prusa i3 MK3S with a Bondtech extruder package, replacement of the X-carriage is required. This kit is a professionally SLS printed package which also includes all the required hardware for installation. If you would prefer to print your own version, there are also STL files available.
|Order Now:||Ships calculating... Free U.S. Shipping|
Upgrade your Prusa i3 with a complete SLS Bondtech package
The Prusa i3 MK2.5S or MK3S are great 3D printers out of the box, but as with any other 3D printer, the addition of a Bondtech extruder package is a preferred investment. The direct-drive architecture of the i3 means that this upgrade kit replaces most of the X-carriage, and for the MK2.5S or MK3S machines a new mounting plate is required. To support this need, Bondtech produces professional SLS 3D printed parts to not only upgrade the printer but make it high-temperature ready in enclosures up to 100°C. These nylon components also include all of the needed installation hardware.
Everything you need to install the Bondtech extruder upgrade kit on your Prusa i3 MK2.5S or MK3S
- Compatible printers: Prusa i3 MK2.5S or MK3S
- Compatible Bondtech upgrade kit: Bondtech Prusa i3 Extruder Upgrade Kits MK2.5S/MK3S
- Material: PA12
- Manufacturing Method: SLS 3D Printing
What's in the Box?
- SLS X-Carriage Front
- SLS X-Carriage Rear
- 5x M3x10 Screws
- 5x M3 Square Nuts
- 1x M3 Nut
3D Print Your Own
If you would prefer to make your own mounts, the files are available here: