Magigoo Pro Metal is designed to provide a reliable first layer adhesion and easy finished part-removal for parts printed with BASF Ultrafuse 316L. Say goodbye to 3D Printing adhesive challenges and hello to Magigoo Pro metal.
|Order Now:||Ships calculating... Free U.S. Shipping|
DESIGNED SPECIFICALLY FOR BASF ULTRAFUSE 316L
BASF Ultrafuse 316L Metal 3D Printing Filament is an industrial material designed for digital fabrication on virtually any desktop 3D printer. When debound and sintered, users are left with a 3D printed part made of nearly 100% solid 316 stainless steel.
Successfully producing parts with this material will require quite a bit more experience and fine-tuning compared to other filaments which is where Magigoo Pro Metal for BASF Ultrafuse 316L comes into play. Designed to provide reliable first-layer adhesion and enable the easy removal of 3D printed BASF Ultrafuse 316L parts, Magigoo helps to minimize the warping effect caused by printing at insufficient bed temperatures.
NON-TOXIC AND ODORLESS
This Magigoo stick won't stink up your workspace with nasty chemical smells.
Magigoo Pro Metal for BASF Ultrafuse 316L is recommended to be used on a build-plate in the temperature range of 95 -105°C.
HOW TO USE:
- Shake the bottle.
- Apply to the desired area by pressing the end on the print-bed (activating the inner valve) and apply as needed.
- Print according to the filament/printer manufacturers recommendations
- Post-printing: Submerse the whole build plate in water or soak around the part with water. After a short period of time — generally 30 minutes to 2 hours depending on the size of the part—the part should come off on its own or be easy to remove with a gentle twist.
- Clean any residue using a damp cloth.