Sale Pulse XE - NylonX Professional Bundle

Succeed With Engineering-Grade Material

Pulse XE NylonX Professional Bundle combines the maximum upgraded Pulse XE 3D Printer with all the materials and accessories needed to print NylonX for a hassle-free advanced material 3D printing experience.

Key Features of Pulse XE Bundle:

• Optimize NylonX Printing Setup From the Get-go
• Succeed with Engineering-grade Material
• Save Big with This Discounted Bundle
• Free 1 Year Warranty with Lifetime Customer Support
• Pre-Assembled in Orange County, California, USA

Designed to Succeed with NylonX

The Pulse XE Bundle is designed to specialize in printing engineering-grade filaments like NylonX by combining the ultimate XE configuration with the right accessories to set you up for immediate success.

• Prints Materials up to 290°C
• Withstands Abrasive Filaments for the Long Haul
• Comes with Filament Dryer to Minimize Hygroscopic Failure

Produce Functional Robust Parts

With an optimal advanced materials 3D printing setup, you can produce more robust parts than ever before for functional use.

• Print Tougher Parts
• Get Functional Use Out of Prints
• NylonX Provides Amazing Strength & Durability

Sleek Finish With Engineering-Grade Material

Produce stunning, sleek finishes when you print NylonX parts on the Pulse XE.

• Beautiful finishes on Parts
• No Post Processing Required
• Minimal Effort Needed

━━━━━

I just love this machine so much!  ★★★★★

-Bill White | Applied Engineering and Technology Teacher & MatterHackers Education Ambassador

"It is the perfect printer for printing functional parts in the school setting or for personal use!"
Read Bill's full review of the Pulse XE here.

━━━━━

A unit well built and of high quality...  ★★★★★

-Richard H. Ford | Medical Institute of Northeast Georgia

"We were surprised at what we found when we received our first printer. A unit well built and of high quality... It worked like a charm right out of the box... No tweaking like other units, just plug it in and run the initial setup as instructed and off you go."

━━━━━

Launchpad Remote Training +$99.99

Access 1 hour of remote training with an Application Engineer to set up for printing success quickly and with confidence.

LayerLock Powder Coated PEI Build Plate +$35

For optimal, strong bed adhesion with standard filaments such as PLA, ABS, PETG, and flexibles (TPU and TPE). Both sides are powder coated with PEI for longer-lasting durability.

LayerLock Garolite Extra Spring Steel Plate +$49

An extra LayerLock Garolite Build Surface installed on a LayerLock spring steel build plate. Succeed with Nylons as well as standard materials like PLA, PETG, and flexibles.

BuildTak Extra Spring Steel Plate +$35

An extra BuildTak Build Surface installed on a LayerLock spring steel build plate. Succeed with standard materials like PLA, ABS, and PETG as well as flexibles.

Pulse 3D Printer Maintenance Kit +$110

Maintenance is a must for any machine. This kit contains all the essential components and tools for standard, minimal maintenance on your Pulse.

MatterHackers 3D Printing Tool Kit Premium +$96

This kit contains all of the essential tools a maker needs for successful 3D printing, as well as additional items that further streamline your FDM experience for faster and better workflow.

Pulse Enclosure Kit - Black +$279

Helps regulate printer's ambient temperature and reduces warping that may occur during printing. This enclosure kit is also available in white (colors do not affect quality or performance).

PrintDry PRO Filament Drying System

Quickly and simply store your filament without any hassle. PrintDry is the perfect moisture control solution for filament storage. Adjust temperatures anywhere between 35°C-70°C and feed filament through small openings on the sides of the chamber if you’d like to print while drying. This filament dry container that comes stock with the Pulse XE also has automatic humidity control and can hold up to two standard spools. Accessories are available to upgrade the PrintDry PRO to hold up to 4 spools or a large spool.

Two Spools of 1.75mm NylonX (0.5kg)

Our very own engineering grade nylon filament is blended with chopped carbon fibers (approximately 20% by weight), creating a high-strength filament capable of printing tough, smooth, functional parts. This is the only bundle that comes stock with 2 NylonX spools.

32-Bit CPU

Print faster, cleaner, and more accurately. Assembled with stepper drivers for a silent printing experience. This higher-bit CPU allows the printer to utilize more features (independent Z motors, filament runout sensor, printing larger models) without negatively affecting print quality results.

Auto-Mesh Bed Leveling

Pulse utilizes its independent Z motors combined with a genuine BLTouch probe to automatically level the bed before printing for a truly even bottom layer.

Filament Runout Sensor

This will alert MatterControl to pause your print session when the spool is out of material, minimizing chances of incomplete prints.

Hi-Res LCD Screen

Allows for printing tetherless via standard SD card, manually adjusting nozzle and heated bed capabilities, and customizing the backlight color of the LCD screen across the RGB spectrum.

SNAP Quick-Change Tool Head System

Replace or switch between different hotend-nozzle configurations, without any tools, in a snap. Upgrading and repairing the hot extrusion just got a lot easier.

Slice Engineering Mosquito Hotend

High-quality hotend specially designed to eliminate heat creep and streamline nozzle changes down to one hand and one tool.

ChampionX DiamondBack Nozzle

Designed to reliably withstand the toughest of abrasive filaments for the long haul. DiamondBack has the best thermal conductivity out of most common nozzle types and is made out of the strongest material for a long lifespan.

Bondtech BMG Extruder

A reliable extruder that all but eliminates slipping, deformation, and under-extrusion. Produced by industry leaders over at Bondtech.

Capricorn - Premium Bowden Tubing

Premium quality Bowden tubing that follows stricter diameter tolerances and is formulated with additional additives that increase lubricity in order to eliminate jams, clogs, and gaps in printing.

LayerLock Garolite Bed Surface

Garolite is the go-to bed surface to succeed with Nylon, NylonX, and other nylon-based materials that is also capable of printing standard filaments like PLA.

LayerLock MagBase on Heated Bed 

This magnetic base allows for build surfaces on steel plates to be detachable making print removal and build surface interchangeability a whole lot easier and convenient. The max temperature of the heated bed is 120°C.

24V Power Supply and Spool Holder

This 24V power supply easily processes any complex tasks so no missteps occur during a print job. Additionally, the spool holder intentionally extends from the power supply so there's a seamless path of filament to the extruder for reliable results.

MatterControl 3D Printer Software Including Power Recovery

This free, open-source, all-in-one software package lets you design, slice, organize, and manage your 3D prints. It contains printer settings ideal for the Pulse XE 3D printer and has helpful features such a power recovery, reloading filament mid-print, real-time modification of Z-offset, and more.

• Pulse XE Fully Assembled 3D Printer
• 1 x MatterHackers PRO Series Ryno - 1.75mm (0.75kg)
• 2 x MatterHackers NylonX - 1.75mm (0.5kg)
• PrintDry PRO Filament Drying System
• PVA Glue Stick
• 3pc Hex Wrench Set
• Spool Holder Rod
• USB Cable
• Getting Started Flyer