Ultimaker Ultimaker 3 Maintenance Kit
For Ultimaker 3 power users, you need to keep your machine in tip-top shape at all times. This maintenance kit includes the most common parts on the Ultimaker 3 and Ultimaker 3 Extended that need replacing.
Your Ultimaker will always take care of you, so return the favor with the Ultimaker 3 Maintenance Kit.
|Order Now:||Ships calculating... Free U.S. Shipping|
Keep your Ultimaker 3 in perfect condition
The Ultimaker 3 is a robust machine and will not fail you, but regular machine maintenance is always recommended. Here are the recommended procedures for every three months of machine use:
- Check for play on the axles
- Ensure proper belt tension
- Clean fan on the front of the tool head
- Clean print cores
- Lubricate Z axis lead screw
In addition, Ultimaker recommends a cleaning of the extruder gears and replacement of the bowden tubes every year. Keep in mind that these figures are based on 1500 machine hours per year, and if you are using your Ultimaker 3 more than that this maintenance cycle should be accelerated.
- 2x Bowden tube
- 1x XY calibration sheet
- 1x Calibration card
- 1x Glass plate
- 1x Hex screwdriver 2.0
- 5x Silicone nozzle cover
- 4x Clamp clip
- 4x Tube coupling collet
- 2x Build plate clamp
- 1x Ultimaker 3 cleaning filament
- 1x Axial fan
- 2x Radial fan