IGUS iglidur l180-PF Tribo-Filament - 1.75mm (0.25kg)

Iglidur l180-PF Tribo-Filament is up to 50 times more abrasion-resistant than conventional 3D Printer materials. This new filament has super low friction properties which make it ideal for use in bearings and prototypes.

Note: Each spool is 0.25kg

Product No. M-CG1-GJ78
List Price: $95.00

iglidur I180-PF is the first filament to be optimized for repetitive movement, is up to 50 times more abrasion resistant than other 3D printing materials, and creates an extremely low amount of friction. These characteristics, found nowhere else in the 3D printing world, make it possible to print functional bearings that are self-lubricating.

Spool :

  • Diameter : 200 mm
  • Center hole diameter : 55 mm
  • Width : 54 mm

iglidur® I180-PF technical specifications :

  • Hot-end : 220 – 250 °C
  • Bed : 90 – 110 °C
  • Density : 1.21 g/cm3
  • Shore D : 66
  • Saturation with moisture absorption at 23°C / 50% r. h. : 0.3 weight %
  • Saturation with water : 0,9 weight %
  • Flexural modulus: : 1000 MPa
  • Flexural strength : 44 MPa

Thermal Properties :

  • Highest long term service temperature : 80°C
  • Highest short term service temperature : 90°C
  • Highest short term ambient temperature : 105°C
  • Lowest service temperature: -40°C

Electrical Properties :

  • Specific volume resistivity  : > 10^12 Ω / cm
  • Surface resistivity  : > 10^11 Ω
Back to top
loading...