If you've been dying to print nylon but never could because of your printer's temperature limitations, you finally have the chance! Meet Nylon 230, the nylon filament that prints at 230°C and does not, we repeat, DOES NOT require a heated bed!
Taulman's Nylon 230 is the first nylon able to be printed at the low temperature of 230°C and without a heated bed! Taulman 230 can be printed on virtually any 3D printer. While not quite as strong as its Taulman brothers - Nylon 618, 645, and Bridge - this nylon is still strong and durable.Nylon 230 is also chemically resistant making it an excellent candidate for producing functional parts.
Want engineering grade parts but don't have an all metal hot end? Looking for an alternative to ABS and PLA? Look no further. Start printing with Nylon 230 today.
MADE IN USA
Printing Temperature: 225 - 235°C
Print Speed: 80% of ABS speeds
Retraction: .5mm nozzle = 5mm
Hot = Glass heated to 45C with coat of PVA glue stick
Cold = Blue tape
Cold = BuildTak with coat of PVA glue stick
Put simply, MatterHackers is the smart place to shop for all things 3D printing and digital manufacturing. The MatterHackers pros are here to partner with you through every step of your journey turning idea into reality and here are just a few of the perks you’ll receive as a customer:
Have a question about this MatterHackers Taulman Nylon 230 Filament - 1.75mm (1lb)? Looking for a recommendation? No problem. Feel free to contact us.