Need a gift by Christmas?
We recommend you order by 12/14 at 1:00 pm PST for delivery by Christmas Eve.
Shop All Deals

3DXTech 3DXTech CarbonX PETG+CF Filament - 2.85mm (0.75kg)

Sale

3DXTech CarbonX PETG+CF is made using 3DXTech's high-flow PETG and premium modulus carbon fiber. This material is engineered to offer ease of printing, strength, stiffness, excellent dimensional stability, and an amazing surface finish.

10% off - use code BESTDEALS during checkout - offer ends 12/31/2022
loading...
Product No. loading...

BENEFITS OF CARBONX PETG+CF FILAMENT:

  • Superior chemical resistance vs. ABS
  • Amorphous structure giving it low, near isotropic shrinkage
  • Low moisture absorption, 3x lower than ABS
  • Very low odor while printing
  • Wide processing range from 230-270°C

PETG AND CHEMICAL RESISTANCE:

Unstressed tensile bars molded of PETG exhibit good resistance to dilute aqueous solutions of mineral acids, bases, salts, and soaps, and to aliphatic hydrocarbons, alcohols, and a variety of oils. Halogenated hydrocarbons, short-chain length ketones, and aromatic hydrocarbons dissolve or swell the plastic.

TECHNICAL SPECIFICATIONS:

  • 1.75mm and 2.85mm +/- 0.05mm in diameter
  • Extruder: 230-260°C
  • Bed Temp: 70-90°C
  • Nozzle: We currently recommend a hardened steel nozzle with a minimum diameter of 0.4mm.
  • Other: Ideal layer height is 60% of nozzle diameter. We do not recommend printing layers smaller than 0.2mm with carbon fiber reinforced filaments.
  • Bed Prep: Magigoo 
  • Heated Chamber: Not required
  • Drying Instructions: 65°C for 4 hours.
Back to top