The Combined Filter for BOFA Print PRO 2 & 3 Fume Extraction System contains both a HEPA filter stage as well as an advanced carbon filter stage. The webbed mini-pleat surface of the HEPA filter grabs any small particles and fine dust that may have escaped the Pre-Filter so that the advanced carbon filter can efficiently absorb and eliminate any fumes that remain before fresh, clean air is vented out. The HEPA filter boasts an efficiency of 99.997% at 0.3 microns, while the carbon filter includes several pounds of activated carbon. Both are combined into a single unit, which is recommended to be replaced every 12 to 18 months.
|Order Now:||Ships calculating... Free U.S. Shipping|
Replacing the Combined HEPA/Carbon Filter on your BOFA Print PRO Fume Extraction System is simple!
The BOFA 3D PrintPRO 2 & 3 Fume Extraction System can sit on your desktop, workbench, or on the floor with the Stay Put Arm and funnel positioned next to your 3D printer’s build area. It pulls a small amount of air and any fumes that would come from heated filament extrusion and filters it through a three-stage filtration process. First, the surface area of the pre-filter captures any large particles before the webbed mini-pleat HEPA filter grabs any small particles that may have escaped the pre-filter. Finally, the optimized advanced carbon filter absorbs and eliminates any fumes that remain before venting out nice, clean air. BOFA has made it simple for users, and each filter stage features a condition indicator, so that you know when it is time to replace the filter.
Put simply, MatterHackers is the smart place to shop for all things 3D printing and digital manufacturing. The MatterHackers pros are here to partner with you through every step of your journey turning idea into reality and here are just a few of the perks you’ll receive as a customer:
Have a question about this MatterHackers Combined (HEPA/Carbon) Filter - BOFA Print PRO 2 & 3 Fume Extraction System? Looking for a recommendation? No problem. Feel free to contact us.