The Shapeoko from Carbide 3D is an incredible desktop CNC Router kit that can take on a wide variety of stock materials, and with the T-Track and clamp kit, the securing of those stock materials anywhere in the build area of your Shapeoko 4 or Shapeoko Pro is a breeze.
Anything, anywhere
The T-Track and Clamp kit for the Shapeoko 3 or Pro is an addon for the standard MDF wasteboard and includes narrow MDF sections with aluminum t-tracks in between. These tracks hold on to bolt heads and provide a secure anchor point for material clamps. With multiple tracks the different material sizes and shapes mountable are effectively limitless! The included clamps are (of course) CNC machined and adjustable in positioning. In the event you need special sized clamps, you are already equipped with your Shapeoko to custom make you own. If you are looking for stock material, we suggest the MatterHackers Project Wood.
Please note that the T-Track and Clamp Kit is not compatible with Shapeoko 4.
T-Track and Clamp Kit installed above the standard wasteboard
OEM Fit and Finish
The T-Track and Clamp kit is manufactured by Carbide 3D, so the sizing and fitment of individual parts are just right. As mentioned above, the T-Track installs on top of the standard wasteboard and so is best purchased along with your machine to be assembled as part of the kit during the initial setup. But if you already own and are loving your Shapeoko 3 or Shapeoko Pro, have no fear - the T-Track kit can be easily added on at any time after assembly as well.
Shapeoko XL with installed T-Track
What's in the box?
- 4x 1.25" Hex Bolts
- 4x 1.75" Hex Bolts
- 4x 2" Hex Bolts
- 4x 2.25" Hex Bolts
- 4x Thumb Nuts
- 4x Clamps
- 3x T-Tracks (different length per machine)
- 2x Side Filler Boards (different length per machine)
- 2x Middle Filler Boards (different length per machine)
- 50x #8 x 0.5" Screws to secure T-Tracks
- 30x #8 x 1.25" Scres to secure Filler Boards
- 1x #2 Phillips Driver, magnetic and fits 0.25" Hex drive
- 1x 5/64" Drill Bit
Make sure you select the correct size T-Track kit to match your machine size, they are NOT cross-compatible!
Included Clamping Hardware
Please note: Carbide 3D products are no longer eligible for the redemption or accrual or MatterHackers Rewards.
