Creality Creality SpacePi x4 Filament Dryer
The Creality SpacePi x4 keeps filaments dry and print-ready for consistently high-quality, moisture-free prints by drying and storing up to four spools at once. It has dual independent chambers for separate temperatures and an 85℃ max, with SpaceDry 4.0 active dehumidification and 360° hot air circulation.
- Dry different filament types simultaneously at separate temperatures
- Keep four spools print-ready for uninterrupted multi-color jobs
- Sustain continuous low-humidity filament storage for long prints
| List Price: | $199.00 |
|---|---|
| Price: | $159.00 |
| Price: | $... |
| Order Now: | Ships calculating... Free U.S. Shipping |
Creality SpacePi x4
High-Capacity, Dual-Chamber Filament Drying for Demanding Prints
The Creality SpacePi x4 is a powerful filament dryer designed to dry and store up to four spools at once. With dual independent chambers, high-temperature capability up to 85 °C, and smart energy-saving modes, it delivers consistent, reliable drying for everything from PLA to engineering-grade filaments.
Key Features of the Creality SpacePi x4 Filament Dryer:
- Dry Up to 4 Spools Simultaneously: Ideal for multi-material and multi-color workflows
- Dual Independent Chambers: Precisely control temperatures for different filament types at the same time
- High-Temperature Drying up to 85 °C: Suitable for engineering filaments like PA, PAHT, PC, and ASA
- SpaceDry 4.0 System: Combines active dehumidification, desiccant regeneration, and 360° hot air circulation
- Smart, Safe, and Quiet Operation: Touchscreen control, automatic safety protections, and optimized fan noise reduction
Dry 4 Spools at Once
For maximum efficiency, the Creality SpacePi x4 is a filament dryer that fits all your multi-color printing and multi-filament drying needs. Connect this dryer to up to 4 printers using PTFE tubes for a seamless workflow.
Perfect for Engineering Filaments
Dual 200W PTC heaters combined with an insulated chamber deliver fast, efficient heating up to 85°C, ensuring consistent and reliable drying for engineering filaments like PA, PAHT, and PC.
- Temperatures reaching up to 85°C
- Consistent and realiable drying
- Ideal for engineering filaments
- Caution: High-temp drying requires heat-resistant spools
Benefits of Drying
The Creality SpacePi x4 eliminates issues of stringing, clogging, layer shifting, and poor adhesion through removing humidity from drying. This allows for filaments to be in the most optimal conditions for smooth, high-quality prints.
- Removes humidity that causes poor printy quality
- Restores filament to their most optimal state
- Dries filaments of all types with high temp capabilities
| Filament | Temperature |
|---|---|
| PLA | 50℃ |
| PETG | 60℃ |
| TPU | 60℃ |
| ABS / PET / PC / ASA / PA / PAHT |
80℃ ~ 85℃ |
Recommended Temperatures
Refer to the filament manufacturer recommended temperatures for best results.
Dual Chamber Control
With two independent heaters, both chambers deliver precise, independent temperature control for drying two spools at once. This allows for the simultaneous drying of two different types at different temperatures in one machine.
- Independent dual chambers
- Precise temperature control
- Simultaneous drying of two filament types
Flexible and Energy-Efficienct
The Creality SpacePi x4 features single or dual chamber modes for efficient, customizable drying. Save up to 40% energy for lower costs and reduced environmental impact with these different modes.
- Single and Dual Chamber Modes: Customizable to fit your needs
- Smart Energy Savings: Optimized heating reduces power usage by up to 40%
SpaceDry 4.0
The SpaceDry 4.0 is the one-stop drying solution that has the perfect balance between efficient dehumidification and energy-saving drying. With a dual-chamber design, this system powers efficient heating, dessicant regeneration, and active dehumidifcation for improved drying and storage.
- 360° Hot Air Circulation
- Desiccant Regeneration
- Active Dehumidification
- One-Way Valve Design
 |
360° Hot Air Circulation |
|---|
The 360° hot air circulation ensures uniform drying of filaments for efficient heating and consistent temperatures.
 |
Desiccant Regneration |
|---|
Seamless workflow is supported with the connection of the desiccant chamber and heating airflow, regenerating the desiccant with each use.
 |
Active Dehumidification |
|---|
During drying, dual dehumidifying fans actively expel moisture during drying.
 |
One-Way Valve Design |
|---|
For guaranteed dryness, this airtight design avoids further moisture.
Enhanced Features
The Creality SpacePi X4 features an intuitive touchscreen interface, intelligent fan speed reduction for quieter operation, completion sound alerts, dedicated lighting for each chamber, and individual on/off controls for every feature.
- Intuitive Touchscreen Interface
- Sound Alerts and Automatic Fan Noise Reduction
- Dedicated Chamber Lighting
Safety Protection
Featuring automatic drying pause for abnormal or interrupted fan speeds, PTC fuse with self-reset, and NTC sensors at air outlets for abnormal temperature checking, this dryer ensures safety with every use with early detection of issues.
- Automatic pause for unwarranted fan speeds
- PTC fuse disconnects and reconnects at correct temperatures
- NTC sensor at air outlet for temperature monitoring and pausing
Quality of Life
Designed for everyday ease of use, this dryer supports multiple spool sizes and filament types while improving safety and handling.
- Wide Compatibility: Supports 1 & 2 kg spools with both 1.75 & 2.85 mm filament diameters
- Smooth & Safe Feeding: PTFE tube connectors with top/rear outlets and anti-scalding rollers for easy routing and handling
- User-Friendly Design: Moisture-proof sealing, sliding lock mechanism, and secure enclosure for safe operation
What are the Tech Specs of the Creality SpacePi x4?
| Product Size | 382 × 290 × 270 mm |
| Packaging Size | 453 x 350 x 330 mm |
| Product Net Weight | 5 kg |
| Rated Power | 360W |
| Housing Material | ABS / PA / PC |
| Flame Retardant Grade | UL 94 V-0 |
| Temperature Range | 45 - 80℃ |
| Drying Time | 1 - 48 hrs |
| Input Voltage | UK / GB / EUR / AUS / BRA / CHL / ARG 220 - 240 V ~50 / 60 Hz US / JPN 100 - 120 V ~50 / 60 Hz |
| Applicable Filament | Spool Diameter ≤ 200 mm, Width ≤ 150mm Wire Diameter: 1.75 / 2.85 mm |
