Duet3D Duet3D Duet 3 Mini 5+ 3D Printer Controller Board - WiFi
The Duet 3 Mini 5+ balances value and performance, focused on small and medium size machines that do not need the high power output of the Duet 3 Mainboard 6HC. It provides 5 on board drivers and the normal complement of heaters, fans, IO, LCD etc. There are Wifi and Ethernet variants, with the option of using an SBC (Single Board Computer, e.g. Raspberry Pi) for control in the same manner as other Duet 3 mainboards. It has a header for a two driver expansion board and a CAN-FD port for connecting Duet 3 expansion and tool boards.
Features of Duet 3D Duet 3 Mini 5+
- Powerful 32 Bit Processor (ARM Cortex M4 @120Mhz)
- Dedicated High speed bus to a single board computer (e.g. Raspberry Pi) for the user interface and plugins
- 5 Trinamic 2209 stepper drivers running at up to 1.4A RMS, 2A peak with firmware control of the full feature set including up to 256 microstepping, StallGuard 2 and StealthChop2
- CAN-FD bus that supports the next generation of Duet3D expansion boards, smart tools and custom addons.
- 7 PWM outputs of varying current capacities support a high current heated bed, 2 extruders and 4 fans.
- 7 IO ports for endstops, probes, filament monitors and other sensors.
- 3 Thermistor/PT1000 inputs and support for 2 PT100 or thermocouple inputs via the optional daughterboards.
- Set up your printer and update the firmware through the web interface.
- All common 3D printer geometries are supported
- Support for a wide range of Z probes including DC42’s IR Z probe and the Duet3D Smart Effector for delta printers.
What's In The Box:
- Duet 3 Mini 5+ Board
- Connector Kit
- SBC Cable
- Wifi Antenna