The E3D v6 is one of the most versatile and adaptable 3D Printer hotends on the market, with the standard heater block accepting nozzles from 0.15mm all the way up to 0.8mm and the Volcano heater block accepting up to a 1.2mm nozzle. Enter the SuperVolcano - a monstrous hotend with a gigantic melt zone allowing for nozzles up to 1.4mm in extrusion diameter. Print fast, print huge. Do it all with E3D SuperVolcano!
|Order Now:||Ships calculating... Free U.S. Shipping|
Your one and done upgrade pack to SuperVolcano
This Eruption pack includes everything you need to convert an existing v6 or Titan Aero hotend to SuperVolcano with a variety of nozzle sizes. Replace the standard heater block with the included SuperVolcano block, 80w heater cartridge and extra long nozzle for the ultimate in fast, strong 3D printing hardware. With variable nozzle sizes available from 0.6mm all the way up to 1.4mm the SuperVolcano is applicable in a wide variety of applications where ultra wide or high speed are important factors. With the standard Plated Copper heater block, the SuperVolcano welcomes temperatures upwards of 400°C with an upgraded temperature sensor.
Assembled SuperVolcano Heater Block
What's in the box?
- SuperVolcano Plated Copper Heater Block
- Silicone glass fiber insulating sock
- Thermistor with extension cable
- 12v 80w Heater Cartridge
- Thermal Paste
- 4x M3 grub screws
- Hex Key
- Mosfet board
- Mosfet wiring kit
Due to the current of the 12v electronics, the Mosfet board is required to run the heater cartridge at this voltage!
Everything you need to upgrade today!