E3D CLEARANCE - E3D Cyclops+ Air Cooled Dual Extrusion Hotend - 1.75mm (24v)


This experimental dual extrusion nozzle has got the 3D printing world excited by its potential possibilities! This 2 in 1 out extruder takes two materials in and prints through one nozzle, alternating between the different filaments. With the ability to swap between air and water cooled versions, the Cyclops+ hotend system is more versatile than ever before.

Product No. M-GRX-QVN3
List Price: $150.08
Price: $90.91
Price: $...
Order Now: Ships calculating... MatterHackers Shipping Truck Free U.S. Shipping

Please note, all Clearance Item purchases are final and are not covered by the MatterHackers Return Policy - this excludes Refurbished 3D printers and machines which have at least a 6-month warranty.

Reason for Clearance:  This item is being discontinued.

One nozzle, two materials

The Cyclops+ hotend features a unique two into one filament path that blends two separate inputs into a single heater block and extrudes them from a single nozzle. The ecosystem supports either air or liquid cooling, and this kit includes the air cooled heatsink. One of the major calibration pains with dual extrusion is configuring nozzle offset and the Cyclops makes it easy thanks to a single, shared nozzle for both.

Two materials, one nozzle

Easily swap components

The E3D Dual Extrusion + ecosystem features only two heater blocks; one for air cooling and one for liquid. Both utilize heat breaks that secure via set screws and both the Cyclops and Chimera heaters are compatible with either cooling system. With either heatsink installed, it's a quick swap between Cyclops and Chimera.

Which E3D Hotend is right for you?

From the mainstay v6 to the diabolical quad-extrusion Kraken, E3D has a hotend to suit your needs. The v6 is the king of single extrusion with a wide variety of nozzle sizes and materials available, including the Volcano system. The Cyclops+ brings dual extrusion with a single, shared nozzle to maintain easier leveling and calibration. To mix and match nozzle sizes and types the Chimera+ uses two v6 or Volcano hotends together. Easily run a 0.4mm nozzle for fine detail perimeters and a 0.8 for fast and strong supports or mix brass for low temp and Nozzle X for high temperature materials. Kraken is the ultimate in multi-extrusion with four individual nozzles. Setting up Kraken is no simple task, but for the maker/hacker looking for the ultimate test it's truly the top of the mountain. Check out this graphic for a visual overview of all these options.

What's in the box?

Air Cooled Cold Side:

  • Air cooled heatsink
  • 2 black plastic collets
  • 2 blue plastic collet clips
  • Cyclops+ fixings kit (compatible with Cyclops+ and Chimera+)
  • 800mm PTFE bowden tubing
  • 12v fan

Cyclops+ Hot Side:

  • 0.4mm brass Cyclops nozzle
  • Cyclops+ heater block
  • 2x Cyclops+ Heat Breaks
  • Cyclops+ Hot Side fixings kit
  • Thermal compund
  • 24v 30w Heater Cartridge
  • Thermistor Cartridge

Please note, all Clearance Item purchases are Final Sale and are not covered by the MatterHackers Return Policy - this excludes Refurbished 3D printers and machines which have at least a 6-month warranty.

Notify me when this item becomes available

Back to top