Liqcreate Liqcreate Resin for SLA / DLP / MSLA 3D Printers - Wax Castable (1kg)

Liqcreate Wax Castable is a wax-based photopolymer resin designed for use on all open source SLA, DLP & MSLA 3D printers in the range of 385 - 420nm. Parts printed using Liqcreate Wax Castable exhibit a smooth print finish and will burn out cleanly and ash-free when used in casting making it perfect for use in the jewelry, dental, and industrial industries.

Product No. loading...


  • 385 – 420nm wavelength 3D printer compatibility
  • Blue coloration
  • Wax-based
  • Smooth surface finish
  • High level of precision
  • Capable of capturing intricate features
  • Clean, Ash-free burnout
  • Excellent for casting positive and negative engravings.


  • Dental models
  • Jewelry manufacturing
  • Industrial part casting
  • Direct investment casting
  • Casting Positive and negative engravings


  1. Shake the bottle for at least 60 seconds before use.
  2. Allow the resin to rest for 10 minutes after shaking to let air bubbles escape before pouring into resin vat.

Note: This resin can be poured back into the bottle after use, however, it is important to check for residual pieces of polymer before doing so. Always take protective measures when handling Liqcreate resins. For more details on safety please check the attached Technical Data Sheet.


  • Container: Bottle
  • Net weight: 1kg
  • Wavelength: 385- 420nm
  • Viscosity: 700 cps at 25°C
  • Density: 1.18g/cm



The following compatible 3D printers and settings are available for Liqcreate resins, which are internally tested by Liqcreate and industrial partners:

  • Miicraft 125
  • Cubicon Lux hd
  • Anycubic Photon
  • Kudo3D Bean
  • Wanhao Duplicator 7
  • Phrozen Shuffle
  • Phrozen XL
  • Phrozen Transform
  • Elegoo Mars
  • Beam3D Prism
  • Creality Halot-One
  • Creality Halot Sky
  • Shining3D Accufab-L4K
  • Shining3D Accufab-L4D
Back to top