Lyten Lyten PA1205 Graphene Filament - 1.75mm (3kg)
The Lyten 3D Filament PA1205 is a high-performance graphene-enhanced nylon engineered for demanding industries including aerospace, motorsports, automotive, and robotics. Powered by Lyten 3D Graphene, this advanced composite filament delivers exceptional strength, stiffness, thermal stability, and durability in all print directions. It enables structural parts and functional prototypes that previously required machined composites or metal, all while maintaining surface quality and print reliability.
- Powered by Lyten 3D Graphene, a proprietary supermaterial formulation that boosts mechanical performance in all directions.
- Engineered for aerospace, motorsports, automotive, robotics, and performance manufacturing applications.
- Produces structural parts and functional prototypes that rival machined composites and metal components.
Lyten PA1205 Graphene Filament - 1.75mm
Breakthrough material science
Lyten 3D Filament PA1205 delivers graphene-enhanced nylon performance for aerospace, motorsports, and robotics. Stronger, faster, and more reliable 3D prints.
Key Features of the Lyten PA1205 Graphene Filament:
- Class-defining performance across strength, stiffness, durability, and thermal stability.
- Enables faster print speeds without sacrificing surface quality or dimensional reliability.
- Advanced nylon-based composite with expanded design flexibility for complex geometries.
Next-Generation Material Science
At the core of PA1205 is Lyten's proprietary 3D Graphene technology, a supermaterial additive that fundamentally enhances the mechanical properties of nylon composite filament. This breakthrough results in class-leading strength, stiffness, and thermal performance that outpaces conventional engineering filaments. The graphene integration is uniform and consistent, delivering predictable, repeatable results print after print.
- Proprietary 3D Graphene supermaterial uniformly distributed throughout the filament.
- Boosts tensile strength, stiffness, and heat resistance beyond standard nylon composites.
- Independently tested and validated by third-party reviewers and publications.
Industrial-Grade Performance
Lyten PA1205 is purpose-built for industries where part failure is not an option. Including aerospace, motorsports, automotive, and advanced robotics. The filament produces functional parts and structural prototypes with mechanical integrity that previously required machined composites or metal fabrication. This opens the door to faster iteration cycles and lower-cost production without compromising performance.
- Suitable for aerospace, motorsports, automotive, and robotics end-use parts.
- Replaces machined composites and metal components in many structural applications.
- Delivers multi-directional strength for complex, load-bearing geometries.
Speed, Surface Quality, and Ease of Use
Unlike many high-performance engineering filaments that require extensive tuning and post-processing, Lyten PA1205 is formulated for printability alongside raw performance. Its advanced chemistry enables faster print speeds, excellent layer adhesion, and consistent surface quality right off the printer. Whether you're running a professional production workflow or engineering prototypes, PA1205 is designed to perform reliably.
- Faster print speeds without sacrificing part quality or structural integrity.
- Consistent surface finish and dimensional accuracy across print runs.
- Engineered for reliable, repeatable results on professional FDM 3D printers.
Technical Specifications
| Resin Properties | Metric | Unit | Test Standard(1) |
|---|---|---|---|
| Density | 1.08 | g/cm3 | ASTM D792 |
|
Melting Temp. Crystallization Temp. Glass Transition (Tg) |
178 121 80 |
°C °C °C |
DSC |
|
DTUL, 1.8 MPa DTUL, 0.45 MPa |
122 162 |
°C °C |
ISO 75/B |
| Mechanical Properties | Dry | Unit | Test Standard |
|---|---|---|---|
|
Tensile Modulus(2) XY Orientation Z Orientation |
8900 2700 |
MPa MPa |
ASTM D638 |
|
Tensile Strength(2) XY Orientation Z Orientation |
117 60 |
MPa MPa |
ASTM D638 |
|
Elongation at Break XY Orientation Z Orientation |
3.4 4.9 |
% % |
ASTM D638 |
|
Flexural Modulus(3) XY Orientation Z Orientation |
8700 2800 |
MPa MPa |
ISO 178 |
|
Flexural Strength(3) XY Orientation Z Orientation |
183 91 |
MPa MPa |
ISO 178 |
|
Charpy Notched Impact Strength(4) XY Orientation Z Orientation |
44 8.4 |
kJ/m2 kJ/m2 |
ISO 179 |
| Print Conditions | Typical Value [Metric] |
|---|---|
| Nozzle Temperature | 270 °C |
| Nozzle Diameter | 0.4 or 0.6 mm |
| Bed Temperature | 90 to 110 °C |
| Surface Preparation | PEI print bed: glue stick or liquid glue required |
| Print Speed | Up to 100 mm/s |
| Part Cooling Fan | Off for all layers |
| Drying Conditions |
Lyten PA1205 must be thoroughly dried before use. 140 °F/60 °C for 8 hours under vacuum (optimal), 176 °F/80 °C for 8 hours without vacuum |
| Brim | Use a brim for large prints, sharp corners, and in areas close to the edges of the print bed |
| Additional Testing Information | |
|---|---|
| 1 | Typical property values are intended as guides, not specifications. Properties designated have been determined using methods which are in accordance with, or substantially in accordance with, the specified testing standards. All testing specimens were printed in the specified plane using the recommended conditions, with 100% infill. |
| 2 | ASTM D638 Type IV specimen, 2.0″ (50.08 mm) per minute test speed, 0.16″ (4 mm) thickness. |
| 3 | Chord modulus value, 0.05%–0.25% strain. |
| 4 | Charpy impact test conducted at 23 °C. |
