Magigoo Magigoo Glide Roller
The Magigoo Glide Roller ensures quick, even adhesive application for large or multiple 3D printer build plates, enhancing efficiency and precision for both hobbyists and professional print farms.
- Ensures quick, even adhesive application.
- Ideal for large or multiple build plates.
- Enhances efficiency and consistency.
| List Price: | $28.00 |
|---|---|
| Price: | $28.00 |
| Price: | $... |
| Order Now: | Ships calculating... |
Magigoo Glide Roller
Precision Adhesive Application for Optimal 3D Printing
The Magigoo Glide Roller is the essential tool for achieving consistent and even adhesive application across large or multiple build plates. Designed for efficiency, the Glide Roller ensures optimal adhesion and smooth release, making it a must-have for users managing print farms or maintaining numerous 3D printers. Its innovative design simplifies workflows, enhances precision, and delivers reliable results for passionate makers and professional studios alike.
Key Features of the Magigoo Glide Roller:
- Ensures quick and even application of Magigoo Glide adhesives.
- Perfect for large build plates and high-volume 3D printing setups.
- Provides optimal first-layer adhesion with easy release.
- Ideal for print farms managing multiple machine build surfaces.
- Enhances efficiency and consistency for both hobbyists and professionals.
How to Use the Magigoo Glide Roller in Just Three Easy Steps
1. Shake, press, and apply
Shake the bottle for 3–5 seconds. Press the applicator tip against the build plate to open the spring-loaded valve, then spread a thin, even coat over the print area.
For best results, apply Magigoo to a cool build plate. It can also be applied while the plate is warm.
2. Start printing right away
No drying time is required. Print using your filament manufacturer’s recommended settings for reliable first-layer adhesion throughout the entire print.
Begin at the lower end of the recommended bed-temperature range, increasing in 5°C increments if additional adhesion is needed.
3. Allow to cool and release
After printing, let the build plate cool. A temperature drop of approximately 30–40°C is typically enough for the finished part to release with little or no effort.
Wipe the surface clean with a damp cloth—no harsh chemicals or scraping required.