Thought3D Magigoo PPGF 3D Bed Adhesion Solution for Glass-reinforced Polypropylene Filament
Say goodbye to 3D Printing adhesive challenges with Magigoo for Glass-reinforced Polypropylene Filaments -- this adhesive ensures that 3D prints stick firmly to the print-bed when it's hot and pop off easily once the bed has cooled.
|Order Now:||Ships calculating... Free U.S. Shipping|
DESIGNED SPECIFICALLY FOR GLASS-REINFORCED POLYPROPYLENE FILAMENTS:
Polypropylene, also referred to as PP. is a semi-rigid polymer material used to produce many common consumer products due to its excellent mechanical properties. This material features resistance to chemicals, high-temperatures, impact, and boast a durability against wear and tear making this material suitable for a variety of applications, such as squeezable bottles, flip-top mint containers, car bumpers, toys, and more.
Successfully producing parts with this material will require a bit more experience and fine-tuning compared to other filaments which is where Magigoo for Glass-reinforced Polypropylene comes into play. Magigoo PPGF helps to minimize the warping effect caused by printing at insufficient bed temperatures and will ensure that prints remain firmly secured to the print surface.
NON-TOXIC AND ODORLESS
This Magigoo stick won't stink up your workspace with nasty chemical smells.
You can get over 100 applications from one 50ml tube of Magigoo.
EASY CLEAN UP!
Magigoo cleans up with just a damp cloth or water.
USABLE ON ANY SURFACE
Magigoo for Glass-reinforced Poly Propylene can be used on glass or a multitude of other surfaces. To provide maximum adhesion and prevent printed parts from fusing to surfaces, it is recommended that Magigoo PPGF be applied to all plastic-based surfaces.
HOW TO USE
- Shake the bottle
- Apply to the desired area by pressing the nib on the bed (activates the inner valve)
- Print according to filament/printer manufacturer recommendation
- Allow to cool and remove. The print should pop right off
- Clean using a damp cloth