Magigoo Pro Flex was developed specifically for use with TPU (thermoplastic polyurethane), TPE (thermoplastic elastomer and TPC (thermoplastic copolyester) filaments. Designed with professional users in mind – parts printed using this adhesive will stick firmly to the print-bed when it’s hot and pop off easily once the bed has cooled.
SALE — Offer ends 5/31
THE MAGIGOO PRO SERIES RANGE HAS BEEN DESIGNED FOR ENGINEERING GRADE MATERIALS.
Flexible materials such as TPUs, TPEs, and TPCs, which are sometimes referred to as thermoplastic rubbers, possess several key attributes that make them useful in a wide range of 3D printing applications. In addition to being able to stretch to moderate elongation and return to their original shape, these materials display decent thermal resistance properties, material stability, chemical resistance, and are inexpensive to produce making them ideal for use in industrial applications.
Many flexible filaments suffer the issue of lower adhesion when printed on conventional 3D printing build surfaces and also have a high tendency to warp. Magigoo Pro Flex was developed as a specialized solution for printing with these types of filaments. By acting as an intermediate layer between the build-plate and the 3D printed part, Magigoo Pro Flex enables just the right amount of adhesion and works to ensure that parts are easy to remove.
Magigoo Pro Flex acts as an intermediate layer between the build-plate and the 3D printed part - enabling just the right amount of adhesion and ensuring easy removal of parts.
NON-TOXIC AND ODORLESS
This Magigoo stick won't stink up your workspace with nasty chemical smells.
You can get over 100 applications from one 50ml tube of Magigoo.
Magigoo Flex is designed to work best on glass build surfaces.
EASY CLEAN UP!
Magigoo cleans up with just a damp cloth or water.
EASY TO APPLY AND EAST TO REMOVE PRINTS
Just brush it on the bed and let it dry. 3D prints adhere tight, but removal is quick and easy.
HOW TO USE
Magigoo Pro Flex has been designed and tested to work with a variety of different flexible filament brands.
- Shake the bottle
- Apply to the desired area by pressing the nib on the bed (activates the inner valve)
- Print according to filament/printer manufacturer recommendation
- Allow to cool and remove. The print should pop right off
- Clean using a damp cloth
For larger prints, a 20 mm brim is recommended.
Magigoo Pro Flex was designed for use on glass print surfaces.
Using this product with other than flexible type filaments may cause over adhesion and damage your build surface. In cases of excess adhesion, it is recommended that users wet the print bed with a small amount of water and slowly work it below the part to facilitate easy part removal.