Magigoo Pro HT 3D Bed Adhesion Solution for High Temperature Filament

THE MAGIGOO PRO SERIES RANGE HAS BEEN DESIGNED FOR ENGINEERING GRADE MATERIALS.

High-temperature materials such as PEEK, PEKK, PEI, PPSU, and their carbon/glass-fiber-reinforced counterparts can be incredibly challenging to successfully print with due to their high tendency to warp. The improved mechanical and chemical stability, as well as exceptionally high-temperature resistances displayed by these materials, make these materials highly sought after in the automotive and aerospace industries.

Enter Magigoo Pro HT – a specialized adhesive solution that was developed to address the issue of warping when 3D printing with PEEK filaments at elevated printing temperatures. With Magigoo Pro HT warped prints are a thing of the past.

The adhesive solution for advanced engineering materials has arrived. Magigoo Pro HT is a specialized solution for FDM printing of PEEK, PEI, PPSU filaments.

NON-TOXIC AND ODORLESS

This Magigoo stick won't stink up your workspace with nasty chemical smells.

LONG-LASTING

You can get over 100 applications from one 50ml tube of Magigoo.

Magigoo PRO HT is designed to work best on glass and Garolite build surfaces.

EASY CLEAN UP!

Magigoo cleans up with just a damp cloth or water.

EASY TO APPLY AND EAST TO REMOVE PRINTS

Just brush it on the bed and let it dry. 3D prints adhere tightly, but removal is quick and easy.

HOW TO USE

Magigoo Pro HT has been designed and tested to work with build-plate temperatures of 150°C or lower.

Directions

• Shake the bottle
• Apply to the desired area by pressing the nib on the bed (activates the inner valve)
• Print according to filament/printer manufacturer recommendation
• Allow to cool and remove. The print should pop right off
• Clean using a damp cloth

Tips:

For larger prints, a 20 mm brim is recommended.

Magigoo Pro HT was designed for use on glass print surfaces but will also work on high-temperature Garolite, and other build-surfaces.