Micro Swiss Micro Swiss NG REVO Direct Drive Extruder for Creality Ender 5 / 5 Pro / 5 Plus

The Micro Swiss NG™ REVO Direct Drive Extruder is a lightweight, high-quality extruder designed for 3D printers, featuring a 3:1 gear ratio, hardened steel dual-gear drive, and seamless integration with the E3D Revo Hotend. It enables fast nozzle swaps, easy installation, and is adaptable to a wide range of 3D printers

  • Lightweight with 3:1 gear ratio for improved performance
  • Hardened steel dual-gear drive for reliability and precision
  • Seamless integration with E3D Revo Hotend for easy nozzle swaps
loading...
Product No. loading...

Technical features of the Micro Swiss NG Revo

  1. Gear Ratio: 3:1 for improved torque and precision
  2. Drive Gears: Hardened steel, precision-cut dual gears for reliable and consistent filament feeding
  3. Compatibility: Adaptable to a wide range of 3D printers, including CR-10 and Ender 3 series
  4. Extruder Mount: Low overhang extruder mount enabled by the bevel gear system
  5. Hotend: Designed for seamless integration with the E3D Revo Hotend for fast and easy nozzle swaps
  6. Installation: Solderless, crimpless, butt splice connectors for easy heater cartridge and thermistor connections
  7. Time Required: Approximately 30 minutes for installation, with no firmware modifications needed

Please note that these specifications are subject to change based on the specific model or version of the Micro Swiss NG™ REVO Direct Drive Extruder. Always consult the manufacturer's documentation for the most accurate information.

NG REVO Creality CR-10 / Ender 3 Printers Compatible with the following : 

  • CR-10
  • CR-10s
  • CR-10-S5
  • CR-10-S4
  • Ender 3
  • Ender 3 Pro
  • Ender 3 V2
  • Sunlu S8
  • Sunlu S8 Pro

NG REVO Creality Ender 5 / 5 pro / 5 plus Printers Compatible with the following : 

  • Ender 5
  • Ender 5 Plus
  • Ender 5 Pro

What's included in the box

  • 1x Master Extruder Assembly 
  • 1x Adaptation plate
  • 1x LDO Stepper motor
  • 1x Fan Shroud
  • 1x Custom extension cable
  • 3x Printed Brackets
  • 1x Revo Hotend assembly
    • 1x Revo HeaterCore 24V
    • 1x Revo HeaterCore Spring
    • 1x 0.40mm Brass Revo Nozzle

Hardware:

  • 1x Eccentric nut
  • 1x M5 x .8 x 30mm CAP SCREW
  • 1x 5mm ID 10mm OD Washer
  • 1x M5 x .8 Nylon Lock Nut
  • 2x M5 x .8 x 20mm Nylon Patch CAP SCREWs
  • 4x M2.2 x 8mm Thread Forming Screw for Plastic
  • 4x M3 x 12mm Thread Forming Screw for Plastic
  • 5x Zip Ties
  • 4x butt splice connectors
Back to top