Modix3D Modix Duex Expansion Board BIG-40

NOTE: Items are shipped from Hong Kong. Pricing does not include customs, taxes, or import & brokerage fees. Customers are responsible for these additional fees which will be collected on delivery.

MODIX DUEX-5 EXPANSION BOARD UPGRADE

Improve the function of your Modix BIG-40, BIG-60, BIG-120X or BIG-120Z

This Duex-5 expansion board upgrade doubles the number of stepper drivers from 5 to 10 on your Modix BIG-40, BIG-60, BIG-120X, or BIG-120Z. Once installed, users will be able to utilize features such as automatic printed calibration and automatic gantry alignment.

Here are the top Duex-5 Expansion Board upgrade features:

• 5 additional TMC2660 stepper motor drivers with stall notification.
• 5 additional extruder heater outputs.
• 5 servo outputs with 5V power and 5V signal levels, sharing control channels with the heaters. So you can use unused
• heater channels to drive servos.
• 5 additional endstop inputs with indicator LEDs and 3.3V/5V voltage selection. These are also usable as outputs.
• 5 additional controlled fan outputs, also usable for driving LEDs etc. The output voltage may be switched between 5V,
• 12V and VIN.
• 4 uncommitted general purpose I/O pins.
• 12V switching regulator, for generating a 12V supply for fans, LEDs etc. when the VIN power is higher than 12V.
• 5 additional thermistor inputs.
• Support for 2 more thermocouple or PT100 daughter boards, supporting up to 4 more sensors.
• Optional 5V external power input for powering servos, fans etc.

NOTE: This add-on comes standard with the Modix BIG-Meter and BIG-180X 3D printers.