Sorry, this product is currently unavailable

Alternative products you may be interested in:

CLEARANCE - Natural Premium PLA 90 - 1.75mm (0.75kg)

If you prefer printing with PLA, but need the flexibility of ABS, then PLA 90 is just the filament that you are looking for! With just a slightly higher printing temperature than standard PLA, you'll be printing in no time.

Product No. M-PEK-37G5
List Price: $48.00

Please note, all Clearance Item purchases are final and are not covered by the MatterHackers Return Policy - this excludes Refurbished 3D printers and machines which have at least a 6-month warranty.

Reason for Clearance:  This item is being discontinued.

Premium PLA 90 takes the best of both ABS and PLA and puts it together into one single filament. PLA 90 is a high-grade PLA material that experiences almost no warping. It is firm and less brittle than normal PLA while being bendable like ABS.

This combination of qualities opens up a world of possibilities and makes a great material for prototyping, building objects that need extra hardness and stiffness with a little bit of room for flexing.

 It is also worth knowing that PLA 90 gets softer as temperature increases. This begins just above 90 degrees Celsius. From there, it will get softer until it is eventually soft enough to extrude.

 Tech Specs:

  • Diameter: 1.75mm
  • Recommended Print Temp: 210-230°C
  • Softening Temperature: slightly above 90°C
  • Material: Rigid Premium Polylactic Acid / Polylactide 90
  • Color: Natural/Off White
  • Length: ~100 meters (328 feet)
  • Weight: 0.75kg
  • Spool Dimensions: outer Ø ~ 200 mm, width ~ 55 mm
Back to top