Formlabs Nylon 11 Pro Powder 10 kg for Fuse 1+ 30W
Upgrading to Nylon 11 Pro? Your Fuse 1+ 30W needs a quick recoater upgrade first. Reach out to sales@matterhackers.com before you order.
Experience the pioneering SLS powder that combines the toughness and long-lasting durability of injection-molded thermoplastics, designed specifically for the Fuse 1+ 30W 3D printer.
- Maximum ductility, featuring an elongation at break that is over five times higher than standard materials.
- Enhanced survivability with nearly twice the notched Izod impact strength.
- The uncompromising toughness of this powder is evident, as it demonstrates over ten times higher Gardner impact strength.
- Economical performance with a refresh rate of 30%.
| List Price: | $1,100.00 |
|---|---|
| Price: | $1,100.00 |
| Price: | $... |
Formlabs Nylon 11 Pro Powder
Injection-Molded Toughness, Nylon 12 Reliability
Formlabs Nylon 11 Pro Powder is the first SLS material that combines the toughness and durability of injection-molded thermoplastics with the ease of use and consistent print performance of Nylon 12. Compared to Nylon 12, it delivers five times the elongation at break, twice the impact resistance, and ten times the toughness in fine, thin features, so snap fits, living hinges, and thin walls hold up to real use. It runs at the same 30% refresh rate and print success rate as Nylon 12, making it just as reliable and economical to print.
Key Features of the Formlabs Nylon 11 Pro Powder:
- Combines the toughness of injection-molded thermoplastics with the consistent print performance of Nylon 12
- Five times the elongation at break and twice the impact resistance of Nylon 12
- Ten times the toughness in fine, thin features compared to Nylon 12
- Same 30% refresh rate as Nylon 12, with up to 70% recycled powder
- Built for housings, snap fits, living hinges, thin-walled enclosures, orthotics, and wearables
Advantages of Nylon 11 Pro Powder
Nylon 11 Pro gives you the part performance of a tougher thermoplastic without changing how you print. The conduit tee fitting shown here is Formlabs' Nylon 11 Pro sample part: its living hinge flexes for thousands of cycles without breaking, and its snap fit holds the two halves securely together.
- Five times the elongation at break and twice the impact resistance of Nylon 12, for parts that flex and take hits.
- Ten times the toughness in fine, thin features, so small clips, tabs, and thin walls are far more durable.
- Same 30% refresh rate and print success rate as Nylon 12, so it's just as reliable and economical to run.
Applications of Nylon 11 Pro Powder
Nylon 11 Pro is an engineering material for building the highest-performing prototypes and end-use parts, especially parts that need to flex, snap together, or take an impact.
- Impact-resistant, durable housings and thin-walled ducts and enclosures.
- Snap fits and living hinges that flex again and again.
- Orthotics, prosthetics, and wearables.
Printer Requirements
Nylon 11 Pro Powder needs a nitrogen atmosphere for its material properties and print success. To print it on your Fuse 1+ 30W:
- Print with nitrogen.
- Install the Textured Recoater Roller before your first Nylon 11 Pro print.
Nylon 11 Pro isn't compatible with the original Fuse 1, which has no nitrogen atmosphere. Need a Textured Recoater Roller? Contact our sales team at sales@matterhackers.com.
Post-Processing
Post-processing with the Fuse Sift powder recovery station and a media blasting station is recommended. Fuse Sift recovers unsintered powder so you can mix it back in with fresh powder at Nylon 11 Pro's 30% refresh rate.
Maximize Your Savings
Contact our sales team at sales@matterhackers.com.
| Bulk Order Quantity (kg) | Discount % |
| 10 | 0% |
| 50 | 20% |
| 100 | 25% |
| 200 | 30% |
| 400 | 35% |
| 1000 | 40% |
| 2500 | 45% |
| 5000 | 55% |