|Order Now:||Ships calculating... Free U.S. Shipping|
The light can even be used handheld, so you can get UV light into every nook and cranny of your awesome prints. We recommend holding the light within two inches (5cm) of the area being cured for a fast hardening of your print!
Peopoly has also designed an enclosure for the UV Curing Light! Download the model here so you can print it on your FDM printer. Let us know how you like using it, or if you've come up with any printable improvements!
The label says it all. The Poepoly UV curing light runs at 60 watts and generates UV light in 405nm spectrum. This can damage your eyes if looked at directly, so use eye protection!
At MatterHackers we pride ourselves on offering friendly service, advice and support. Our prices are always the lowest in the industry when you factor in our free shipping for every item on the MatterHackers site (including 3D printers). Most of all, our staff is friendly and knowledgeable. They have been 3D printing for several years now and are happy to answer your 3D printing questions. Have a question about the amazing capabilities of your new UV Light? No problem. Feel free to give us a call.
In short, buying a cool piece of tech like this from MatterHackers is a holistic experience. We are here to partner with you through every step of your 3D printing journey. Additionally, we have all of the Filament and photosensitive resin that you could ever need to design anything you can imagine.