Let this filament's magnetism draw you in! Proto-Pasta's Magnetic Iron PLA functions like a magnet and behaves similarly to iron- you can even get it to rust! Create and print more magnetizing projects right from your home.
Proto-Pasta's Magnetic Iron PLA is truly one of a kind! Like pure Iron, this filament is attracted to magnetic fields. Translation: magnets stick to it! It also rusts like real iron. To get a rusty iron look, "polish" your finished print with a wire brush to expose more of the iron particles to the air. Then, submerge print in a salty solution for about 2-3 days. Soak for a longer period to achieve a rustier finish.
- Material: Natureworks 4043D PLA with finely ground iron powder
- Recommended Extrusion Temperatures: 185 - 205°C
- Bed Temperature: 60-70°C or No Heat when using blue painter's tape.
- True Diameter: 1.75 mm
- Density: 2.00 g/cm³
- Volume: 0.25 L
- Length: 104.0 m
Please Note: Magnets stick to prints made with Magnetic Iron PLA, but printed objects will not function as magnets.