SmartMaterials SmartMaterials Natural Black Innovatefil TPU Carbon Fiber Filament - 2.85mm (0.5kg)

SMARTMATERIALS INNOVATEFIL TPU CARBON FIBER

This Filament is reinforced with high modulus carbon fiber which results in a material that features improved properties such as high tensile strength, high heat tolerance, and greater chemical resistance when compared to unreinforced TPUs. The addition of carbon fiber also gives this material electrical conductivity, making it ideal for applications that require protection against electrostatic discharge.

FEATURES OF INNOVATEFIL TPU CARBON FIBER

• Withstands higher temperatures than ordinary TPU
• Unique semi-flexibility, strong but soft
• Good layer fusion gives good strength regardless of printing direction
• Contains real carbon fibers,
• Has antistatic properties

TECHNICAL SPECIFICATIONS:

• Print Temperature： 215 - 245 ° C
• Bed Temperature： 45 - 60 ° C +
• Recommended minimum layer height:> 0.2mm
• Due to the stiffness of the plastic, it can be perceived as easier to write with than normal TPU
• Shrinkage / warping: Small, recommended fan speed 80 - 100%
• Drying settings: 70 ° C for approx. 4 hours
• INNOVATEFIL TPU-CF is delivered in a vacuum-packed bag to protect against moisture. Before packing at the factory, the strictest quality controls are followed by dehumidifying the raw material until the moisture is below 0.02%
• We recommend storing the filament in a dark and dry environment. This filament can absorb up to 0.5% of the atmospheric moisture, this can also water vapor during printing and will give poor print quality.
• It is recommended to dry the filament before use, preferably in the oven. Preheat the oven to 70c and let the filament stand for about 4 hours.
• This filament requires a reinforced nozzle