LAY-FOMM 60 is the newest innovation from the creator of LAYBRICK, LAYWOO-D3, and BendLay. LAY-FOMM 60 is a foamy material and is highly porous. LAY-FOMM 60 is part rubber-elastomeric polymer and part PVA. Once you rinse this material in water only the rubber polymer remains as your micro-porous and flexible object. LAY-FOMM 60 is slightly firmer than LAY-FOMM 40.
We are the only U.S. authorized reseller of this experimental new filament! LAY-FOMM 60 is part of the new PORO-LAY series which also includes LAY-FOMM 40 and GEL-LAY. Try all 3 today and get porous with your 3D printing!
|Order Now:||Ships calculating... Free U.S. Shipping|
LAY-FOMM 60 is an exciting and new innovation from the creator of LAYBRICK and LAYWOO-D3. We are proud to offer the newest experimental filament from inventor Kai Parthy. We are the only U.S. authorized reseller of this experimental new filament! LAY-FOMM 60 is best characterized as foamy and very porous. This material is made from a rubber-elastomeric polymer and a PVA-component. That means that part of this filament is water soluble. Once you rinse this material in water, the PVA component disappears and the rubber polymer remains as your micro-porous object. LAY-FOMM 60 is ideal for soft rubber-like applications, such as bendable suits and sponge-like objects, ink-reservoirs, bio-cells, micro-foam and elastics. LAY-FOMM 60 comes in a .25kg package.
After finishing your print you will notice that the material is strong and rigid. However, rinse the print with water then your object becomes micro-porous & elastic. This is ideal for printing soft and flexible rubber like objects. This material is very soft and has a shore hardness of A60. To get full flexibility from your print you should leave the printed object sitting in tap water for 1-4 days.
So what's the difference between LAY-FOMM 60 and LAY-FOMM 40? Good question - LAY-FOMM 60 has a shore hardness of A60 and is slightly firmer than LAY-FOMM 40 which has a shore hardness of A40. Both materials are very flexible and only have a difference in shore hardness. These materials are identical with the exception of shore hardness.
The picture below illustrates the fascinating nature of the PORO-LAY series of filaments. The image on the left is PORO-LAY after being printed (strong, sturdy, rigid). The image to the right is that same part after being soaked in warm water (part became elastic, flexible, and rubber like after the rinse).
We recommend printing LAY-FOMM 60 between 220°-230°C. However, remember that each printer is slightly different so you may need to increase or decrease the temperature by 5°C until your print looks perfect!
Check out the video below to learn more about the PORO-LAY series!
LAY-FOMM 60 is part of the new PORO-LAY series which also includes LAY-FOMM 40 and GEL-LAY. The PORO-LAY series is made by taking two different materials such as an Elastomer (rubberlike substance) and then blending that substance with a soluble component such as PVA. So after rinsing your print in water the PVA component dissolves and the print is then flexible and porous.
Fast Facts about LAY-FOMM 60
- After printing rinse with water to create an object that is micro-porous & elastic
- Optimal for printing soft rubber objects
- Shore hardness of A60 (slightly harder than LAY-FOMM 40)
- Print between 220°-230°C
- Filament comes in a .25kg package
Nuggets of Info About the PORO-LAY Series
- POROLAY filaments are dedicated for experimental use. This is bleeding edge filament so start with an open mind!
- All filaments after printing are stiff and unbreakable and printable with standard home-printers (repraps)
- All objects are hot-sealable after drying
- Micro-porous means micrometer-dimensions! Pores are not visible to naked eyes.
- All POROLAY-objects can be filled not only with water, try to use emulsions of oil, glycerine, inks, salty solutions, or ionic liquids to make it conductive!
- you may print without heated bed
- the objects have near zero warp (deformation while printing)
- Design rules: print less walls/shells and less filling % to shorten rinsing time
Put simply, MatterHackers is the smart place to shop for all things 3D printing and digital manufacturing. The MatterHackers pros are here to partner with you through every step of your journey turning idea into reality and here are just a few of the perks you’ll receive as a customer:
- Free, Fast Shipping on orders over $35
No matter how large or small your order is, U.S. customers will always receive free, fast shipping on orders over $35. Most orders placed before 4pm ET M-F ship same day.
- Lowest Price Guarantee
We work hard to make sure that we offer the lowest prices available - shop confidently knowing you’re getting the best deals on the items you love. Learn more about our Lowest Price Guarantee here.
- Rewards Program
We just want to help you save - MatterHackers' customers can earn a store credit of 3% back on all eligible purchases. Learn more and become a Rewards Program member here.
- Success Guarantee
MatterHackers is invested in your success. From our free phone and email support to our easy exchange program, MatterHackers sets you up on the road to success even with just one purchase. Learn more here.
Have a question about this MatterHackers PORO-LAY LAY-FOMM 60 Porous Filament - 1.75mm (0.25kg)? Looking for a recommendation? No problem. Feel free to contact us.