|Order Now:||Ships calculating... Free U.S. Shipping|
Installing Your Hotend Mount
There are two pieces to this file, a crecent looking piece and a larger piece as shown here:
There are holes in these pieces for you to screw your hotend into it. The crecent looking piece should act like a spacer to take up the extra space between the blue piece and the top of the hotend.
Take a look at your motor piece and you'll notice that there are holes in the bottom. Those holes line up nicely with the holes going through the triangles on the blue piece. Line up the holes and make sure that your hotend lines up with the feeding hole.
Now the last thing to do is take this piece (two pieces together, but not screwed together yet) and line it up with the mount for the entire extruder. Bolt all three together with two bolts in their respective holes and you're ready to attach it all to your TAZ!
Put simply, MatterHackers is the smart place to shop for all things 3D printing and digital manufacturing. The MatterHackers pros are here to partner with you through every step of your journey turning idea into reality and here are just a few of the perks you’ll receive as a customer:
Have a question about this MatterHackers E3D Hotend Mount for LulzBot TAZ 4? Looking for a recommendation? No problem. Feel free to contact us.
MatterHackers Digital Designs are easy to access and ready to print within MatterControl.
Digital Design files can be accessed using MatterControl Software, MatterControl Touch or MatterControl Sync. When logged in, Digital Designs can be found within the "Purchased" folder of your MatterControl Cloud Library.
|Instant Digital Delivery|