MATTERHACKERS Silver Soft PLA - 1.75mm (0.75kg)
0.75kg of silver colored Soft PLA.
Soft PLA is a flexible 3D printing material that feels and acts much like rubber. Can be used to make parts that can bend or must flex to fit their environment - stoppers, belts, springs, phone cases and more.
0.75KG of 1.75mm silver colored Soft PLA. This extremely flexible PLA will allow you to create prints that will have the properties of a durable rubber, which means that it is remarkably resilient and elastic.
Sticks great to a bed that is layered with blue painter’s tape. We also recommend that you print it at a slower speed than normal PLA.
Our soft PLA is compatible with nearly all 3D printers, including RepRap derivatives and those from MakerBot (such as the Replicator and Replicator 2), Ultimaker, Bits from Bytes, Airwolf3D, Makergear, Printrbot, Bukobot, Type A Machines, and many others. If you have questions about a specific printer not listed, please contact us.
Recommended Extrusion Temperatures: 220°C-235°C
Spool Dimensions (Aprox.): 200mm Total Diameter x 50mm Inner Hole Diameter x 60mm Height
Ninjaflex VS TPE VS Soft PLA
All 3 filaments are excellent choices but have different levels of hardness and flexibility. Ninjaflex is the softest with a shore hardness of 85A. TPE is slightly firmer but still very soft with a shore hardness of 90A. Soft PLA is the firmest of the three with a shore hardness of 92A. If your printer has a bowden tube Soft PLA is the best choice for you.