3DFuel HydroPro Support Filament - 1.75mm (1kg)

HydroPro is a water-dissolvable support material designed specifically for 3D Printing. Improving upon the original 3DFuel HydoSupport filament formula – Hydro Pro is much easier and more predictable to print with than other PVA filaments on the market.

Product No. M-V4X-V6QV

PROFESSIONAL QUALITY FILAMENT

In addition to being much easier and more reliable to print with than comparable water-soluble materials on the market, HydroPro dissolves quickly and completely when soaked in water.

HydroPro only needs to be soaked for 1-2 hours to easily work supports off by hand and will dissolve completely within 2-6 hours.

IDEAL FOR COMPLEX PRINTS

HydroPro is best suited to be used as support material for printing large overhands, intricate inner geometry, highly complex prints, and deep cavities.

RECCOMENDED PRINT SETTINGS:

  • Extruder: 210 - 230 C
  • Build plate: 45 - 60 C
  • Speeds: Start with your favorite PLA settings
  • Retraction Distance: 1 - 10 mm
  • Retraction Speed: 20 mm/s
  • Bed Material: PEI, Buildtak recommended with a heated build plate (45-60° C)

Note

For best results, store unused HydroPro™ filament in a sealed container with desiccant. HydroPro™ breaks down in the water and is sensitive to high levels of humidity in the air. 

SDS

TDS

Back to top
loading...