Sorry, this product is currently unavailable
Perhaps some of these categories are of interest:
Hydro Pro is a water-dissolvable support material designed specifically for 3D Printing. Improving upon the original 3DFuel HydoSupport filament formula – Hydro Pro is much easier and more predictable to print with than other PVA filaments on the market.
PROFESSIONAL QUALITY FILAMENT
In addition to being much easier and more reliable to print with than comparable water-soluble materials on the market, HydroPro dissolves quickly and completely when soaked in water.
HydroPro only needs to be soaked for 1-2 hours to easily work supports off by hand and will dissolve completely within 2-6 hours.
IDEAL FOR COMPLEX PRINTS
HydroPro is best suited to be used as support material for printing large overhands, intricate inner geometry, highly complex prints, and deep cavities.
RECCOMENDED PRINT SETTINGS:
- Extruder: 210 - 230 C
- Build plate: 45 - 60 C
- Speeds: Start with your favorite PLA settings
- Retraction Distance: 1 - 10 mm
- Retraction Speed: 20 mm/s
- Bed Material: PEI, Buildtak recommended with a heated build plate (45-60° C)
For best results, store unused HydroPro™ filament in a sealed container with desiccant. HydroPro™ breaks down in the water and is sensitive to high levels of humidity in the air.