Need a gift by Christmas?
We recommend you order by 12/17 at 1:00 pm PST for delivery by Christmas Eve.
Learn More

3DXTech 3DXTech FibreX ABS+GF Filament Black - 1.75mm (0.75kg)

3DXTech FibreX ABS+GF10 glass fiber reinforced ABS is formulated to be stiff and strong with excellent dimensional stability. These features allow you to create structural parts without the lifting and warping that can often happen with unfilled ABS.

loading...
Product No. loading...

FIBREX ABS+GF 

FibreX ABS+GF is glass fiber reinforced ABS. It is tough as nails, very stiff, and strong allowing users to create structural parts without the lifting or warping that can happen with unfilled ABS. We use premium ABS and a special glass fiber chosen to be compatible with ABS and the FDM/FFF 3D printing process.

BENEFITS OF ABS+GF:

  • Ideal for structural engineering-grade applications
  • Exceptionally stiff and strong without being brittle
  • Excellent dimensional stability
  • Very low shrinkage, warping, or lifting, something regular un-reinforced ABS is infamous for!
  • High thermal properties allowing it to stay in use up to 98°C depending on mechanical loads applied

TECHNICAL SPECIFICATIONS:

  • 1.75mm and 2.85mm +/- 0.05mm in diameter
  • Extruder: 230-245°C
  • Bed Temp: 95-110°C
  • Nozzle: A hardened steel nozzle with a minimum diameter of 0.4mm
  • Other: Ideal layer height is 60% of nozzle diameter. We do not recommend printing layers smaller than 0.25mm with glass fiber reinforced filaments
  • Bed Prep: Magigoo Bed Prep
  • Heated Chamber: Recommended, an enclosure helps reduce warping and improves print success. 30-80°C if at all possible
  • Drying Instructions: 80°C for 4 hours
Back to top