BASF BASF Ultrafuse BVOH Support Material - 1.75mm (0.35kg)
BASF has engineered a powerful water-soluble support filament with Ultrafuse BVOH, designed to allow complex geometries in your 3D prints by supporting bridging, then completely dissolving once your finished print is submerged in water, resulting in a clean print with no support to remove. The higher the water temperature, the faster Ultrafuse BVOH dissolves.
To learn about available discounts, training, and maintenance options, please use the form below and a MatterHackers Expert will contact you within one business day. Alternatively, you can always feel free to give us a call at +1 (800) 613-4290 or email firstname.lastname@example.org.
To get an instant quote, add everything you need to your cart, and click "Download as quote".
BASF Ultrafuse Has Been Engineered from the Ground Up for Additive Manufacturing
BASF have long been experts in the materials world, designing thousands of powerful products for the manufacturing and engineering industries, across the globe, so stepping into 3D printing was the next step. Applying their experience to desktop manufacturing has resulted in dozens of professional grade 3D printing filaments that perform well without a high barrier of entry. Whether you're firing up your first 3D print or iterating on an enterprise-level project, the Ultrafuse family from BASF is just what you need to succeed.
Print Complex Parts Using BVOH Support Material
By dual extruding with BVOH water-soluable support and your material, it suddenly becomes possible to overcome printing design challenges such as drastic overhangs, bridges, and multiple parts in one print. It adheres well to the bed during printing, then dissolves in water when printing is finished. Digitally fabricate the exact geometry you want from complex architecture models to multi-component assemblies and know BASF BVOH will provide the support you need to produce the best results.
- Nozzle Temperature: 190 – 210 °C
- Bed temperature: 60 – 100 °C
- Bed Material: Glass
- Nozzle Diameter: ≥ 0.4 mm
- Drying: 60 °C in a hot air dryer or vacuum oven for 4 to 16 hours
- Compatibility: PLA, PRO1 Tough PLA, ABS, ABS Fusion+, PA and PAHT CF15