A replacement for one of the two filters in the BOFA AD350 Fume Extractor. The Combined filter includes both a HEPA filter and an activated carbon filter. The HEPA filter collects and removes particulates from the air that are much finer than the pre-filter is able to. It is pleated with webbing between the pleats that prevents airflow vibration or collapse of the filter.
The activated carbon filter absorbs contaminants and odors with great efficiency by compacting several pounds of carbon pieces, which vastly increases the surface area, and so effectiveness, of the filtration.
|Order Now:||Ships calculating... Free U.S. Shipping|
The HEPA filter boasts an efficiency of 99.997% at 0.3 microns. The carbon filter includes 19 lbs of activated carbon. Both are combined into a single unit, which is recommended to be replaced every 12 to 18 months.
Please note that printer kits are not returnable after having been opened and worked on. If there is a problem with the packaging or damage during shipment please return the product immediately, otherwise a return will not be offered after assembly.
Put simply, MatterHackers is the smart place to shop for all things 3D printing and digital manufacturing. The MatterHackers pros are here to partner with you through every step of your journey turning idea into reality and here are just a few of the perks you’ll receive as a customer:
Have a question about this MatterHackers Combined (HEPA/Carbon) Filter - BOFA AD 350 Fume Extraction System? Looking for a recommendation? No problem. Feel free to contact us.