The DeepPleat Pre-Filter for the BOFA AD 350 Fume Extraction System is designed as a barrier to capture dust and larger particulates produced by the normal laser cutting process before the combined HEPA/Carbon filter cleans and cleanses the air. This is an F8 rated filter, with 95% efficiency at 0.9 microns. It is recommended you replace the DeepPleat Pre-Filter in your BOFA AD 350 Fume Extraction System every 12 to 18 months.
|Order Now:||Ships calculating... Free U.S. Shipping|
The BOFA AD 350 Fume Extraction System utilizes a three-stage filtration process. First, the impressive surface area coverage of the DeepPleat pre-filter captures any large particles before the webbed mini-pleat HEPA filter grabs any small particles that may have escaped the pre-filter. Finally, the optimized advanced carbon filter absorbs and eliminates any hazardous fumes that remain before venting out nice, clean air. The reverse airflow technology feature of the BOFA AD 350 unit causes a fall in air velocity causing larger particles to fall out of the air stream and into the filter’s dropout chamber. With less particulate matter entering the filter media, the filter life is significantly increased, enhancing filter capture performance and ensuring a longer life. Regardless, BOFA has made it simple for users, and each filter stage features a condition indicator, so that you know when it is time to replace the filter.
Put simply, MatterHackers is the smart place to shop for all things 3D printing and digital manufacturing. The MatterHackers pros are here to partner with you through every step of your journey turning idea into reality and here are just a few of the perks you’ll receive as a customer:
Have a question about this MatterHackers DeepPleat Pre-Filter - BOFA AD 350 Fume Extraction System? Looking for a recommendation? No problem. Feel free to contact us.