ColorFabb ColorFabb Glowfill Glow in the Dark Filament - 2.85mm (0.75kg)
PLA/PHA is a hybrid material of PLA fused with PHA. This combination of materials significantly increases the toughness of the filament while also ensuring stellar layer adhesion. Plus, by merging these two together, PLA/PHA is also biodegradable.
ColorFabb's PLA/PHA blend is a high quality filament that won't let you down. This unique combination allows for stronger prints with little to no warping.
This material will print successfully on both heated and non-heated print beds. However, if printed on a non-heated platform, using blue painter's/masking tape is instructed.
PLA/PHA is perfect for any protoype or production needs, as this filament is not only tough but pretty too! PLA/PHA comes in an impressive array of colors you won't be able to refuse.
Filament Diameter: 2.85mm
Diameter Tolerance: ± 0.05 mm
Density: 1.210-1.430 g·cm-3
Glass Transition Temperature: 55C
Printing Temperature: 195-220C*
Print Speed: 40 - 100 mm/s
Heated bed (if you have one, not strictly necessary): 50-60C